xharobikeslifex

Removing the SR (not defined)
First removed battery
2nd drain Coolant + Oil

3rd Disconnect hot pipe from turbo *note mark and label every hose you disconnect

4th remove intercooler cold pipe

5th remove radiator + fan shroud

6th remove engine harness most of these pics are 4 my reference





7th disconnect lower harness i chose to leave the harness on the engine when i pulled it


8th remove both motor mount nuts

9th remove downpipe, place a jack under the tranny and remove the cross member+tranny mount then lower the jack slightly and remove the shifter

10th position the jack as needed to finally pull the engine out

11th double and make sure stuff is not hung up and slowly lift and puller out



12th finally get a engine stand and grab a buddy to hump the living shit out of your pulled engine



Oh btw how i managed to get the clip off the ground was i put 2 wheels in the front and 2 jack stands in the rear