4-23-11
I had some bondo spots showing through, so I cut them all out today. Started by sanding the areas down to find the bondo, and started to chizel it out, but then I realized I am going to be smoothing it out anyway, so I took a die-grinder to the bondo and just cut it all out. There were a couple of deep spots, but most of the bondo in the areas was just finishing/ filler. I also ground out the couple of rust spots on the roof. Luckily not deep at all, but I will smooth it all out next week.
Once all the metal was exposed, I went over it with etching primer. I hope that the bondo will stick to the etching primer.
I have never worked in bondo or body work other than a couple of paint jobs and a moto rebuild, so I hope that I make it all good in the end.