Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

angeldunk707 · 07-16-2013, 09:27 PM

I won't count this as an updates since there was very minimal done since the last update. What we have here is the complete engine (excluding intake) dropped in the car in the position it will be in when done. It's kicked a little towards the passenger side due to us test fitting headers on the driver side. As you can see there was a lot of cutting involved which will be covered by a sheet metal tranny tunnel. The oil pan is notched and is ready to get built!

07-16-2013, 09:27 PM	#160
angeldunk707 Zilvia Member Join Date: Oct 2008 Location: S.F. Bay Area, CA Age: 31 Posts: 258 Trader Rating: (8)	I won't count this as an updates since there was very minimal done since the last update. What we have here is the complete engine (excluding intake) dropped in the car in the position it will be in when done. It's kicked a little towards the passenger side due to us test fitting headers on the driver side. As you can see there was a lot of cutting involved which will be covered by a sheet metal tranny tunnel. The oil pan is notched and is ready to get built! __________________ PowerPlenty RWD SR20DET/Impreza GC8 Build:http://imgur.com/a/7KDa1#0