Ok so here is another update.
I decided to go into work today to get some stuff done.
First I cleaned the T56.
Turned out pretty sweet.
Then I test fit the ls1 turbo kit finished manifold, and wastegate setup on the s14
Ok everything fits perfectly on the fc and the s14. I will be making the rest of the downpipe shortly.
At that point I decided to get back to work on the ls1.
It was time to pull the oil pan and install the -10 AN fitting for the turbo oil dump line.
first thing was to remove the pan.
Then I threw it in the parts washer, it will wash overnight.
Ok now for some actual fabrication.
Decided to build the Brake caliper brackets for the rx-7 viper brake kit.
I started by making a prototype out of some thin, easy to work with, steel.
Then I grabbed some 3/8" aluminum plate and sketched out the brackets.
Then bolted it down on the mill
then i went to work.
Drilled the holes.
Aww finished. What a good feeling.
Bolted it on.
Put on the new machined rotor.
Caliper.
Clears cobra wheels. If it clears these then it will clear most 17" wheels.
Clears the rotas with a few inches to spare.
Dont ask me how I made this picture. It just turned out this way. I guess the wheel was invisible for a split second.
Looks soo cool
Nice.
What a fun and tiring day.
What do you guys think? Want some for the S chassis?