Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

614s14 · 08-16-2014, 03:47 PM

I got the fuel pump installed last night. I went with an AEM 320 LPH in take fuel pump.

Here it is next to the stock fuel pump.

This is the flow sheet it came with:

The pump was featured in a "fuel pump shootout"

http://www.importtuner.com/tech/1405...2/viewall.html

The included fuel sock wouldn't work in this application, and the stock fuel sock wouldn't fit on the AEM pump, so I used the AEM's fuel sock fitting with the stock fuel sock.

I had to cut the hard tube off the end of the stock sock, cut off the fitting from the AEM sock, and weld the two pieces together.

Done.

08-16-2014, 03:47 PM	#18
614s14 Join Date: Sep 2013 Location: Columbus, Ohio Age: 31 Posts: 16 Trader Rating: (0)	I got the fuel pump installed last night. I went with an AEM 320 LPH in take fuel pump. Here it is next to the stock fuel pump. This is the flow sheet it came with: The pump was featured in a "fuel pump shootout" http://www.importtuner.com/tech/1405...2/viewall.html The included fuel sock wouldn't work in this application, and the stock fuel sock wouldn't fit on the AEM pump, so I used the AEM's fuel sock fitting with the stock fuel sock. I had to cut the hard tube off the end of the stock sock, cut off the fitting from the AEM sock, and weld the two pieces together. Done.