Quote:
Originally Posted by R_G
The car does have oem power locks. I did connect the blue and green wires for the door locks. I just don't know why they are not working.
The question about the parking lights is that mine don't flash , so I'm thinking I hooked something up incorrectly . I do want them to flash when arm and disarm. I just hope I don't have a bad system.
|
Did you test the wires to confirm they were indeed the lock/unlock wires before you tapped into them? If they do indeed test, then simply touch ground to the lock wire of the car and it should lock the doors. If so, then you have a bad Viper or you have something wired incorrectly somehow.
As for the parking lights, do you have the correct red/blue wire.... did you test to confirm? There are two red/blues in the ignition harness if that's where you got it. Only one of those is the parking light wire. Also, the obvious: did you insert the parking light fuse under the door on the brain?
Quote:
Originally Posted by mikeroy420
Toby, with the audio sensor and its extra 3 pin connector. I dont have a shock sensor, so can I just use the prox/motion sensor in its place? Thanks
|
Basically the prox will plug into the port on the brain. Then you will cut off the ends of the audio sensor and tap the blue, red and black wires in with the same colors on the prox cable. Does that make sense?