teddyjr

Thanks for the link. It's not there. The rubber seal you see there (66822) is the one that's tubular with a series of white push clips. It seals the engine compartment between the underside hood bracing and the front edge of the cowl panel. What I need is a solid flat strip about 3/8 wide x 1/8 thick that is sandwiched between the rear edge of the cowl panel and runs the whole way across the base of the windshield glass.

Maybe other 240s don't have this and someone added it to this car. Thing is, this car was completely unmolested until I put the RB25 in it. I might have to put up a photo later.