Wassup guys been on here for a while figured i'd share my Rb25 build...
Ok so i have a S13 Hatch that's being built for Time Attack/Drag and some Autox...
The original plan was to build a KA but i've been through my share so i figured i'd go a diff route... " Motor Swap " thought about and chose the Rb... Ok now to so Pics...
How the car sat with the KA still in...
Untitled by
89jdm240sx, on Flickr
I brought a daily so now it was time to get cracking... Pulling out the Old faithful...
Untitled by
89jdm240sx, on Flickr
The next week i got cracking on stripping and cleaning the bay for paint...
Untitled by
89jdm240sx, on Flickr
After grinding and sanding here's the final result of the bay... ( Rustoleum Metallic )
Untitled by
89jdm240sx, on Flickr
Untitled by
89jdm240sx, on Flickr
With the bay finished for now i turn my focus to the inside of the car... Doing a little weight reduction...
Untitled by
89jdm240sx, on Flickr
Untitled by
89jdm240sx, on Flickr
Sound deading removal...
Untitled by
89jdm240sx, on Flickr
Since i had to move the from my driveway i took it to my shop for some lift time...
Untitled by
89jdm240sx, on Flickr
Untitled by
89jdm240sx, on Flickr
Next i started stripping off all the undercoat for chassis welding and repaint...
Untitled by
89jdm240sx, on Flickr
Motor specs: Rb25det Series 2
The goal is to make the most power possible without a stroker kit... the Block was bored .40 over hot tanked, honed, Crank knife edged ( stock)
I ordered my pistons and Rods... Mahle Pistons .40 and Manley Turbo Tuff Rods and ACL bearings...
Untitled by
89jdm240sx, on Flickr
Ordered Greddy Intake Mani...
Untitled by
89jdm240sx, on Flickr
Untitled by
89jdm240sx, on Flickr
The Head:
Untitled by
89jdm240sx, on Flickr
The head recieved a full race port n polish and angle job... All parts for the head are Tomei
Tomei Oil galley Orifice 1.5
Tomei In/Ex Valves
Tomei Dual valve springs
Tomei Poncams 265
Tomei valve guides
Will have pics soon
R33 Diff i picked up:
Untitled by
89jdm240sx, on Flickr
Got the block back from Machine shop...
Untitled by
89jdm240sx, on Flickr
I got my valve covers and brakes powdercoated... R32 GTR brakes
Untitled by
89jdm240sx, on Flickr
Greddy Mani after port n Polish...
Untitled by
89jdm240sx, on Flickr
Untitled by
89jdm240sx, on Flickr
Other parts i have brought:
5 lug conversion
Wiring specialities harness
N1 waterpump
N1 Oil pump with spool gear
Cometic Head gasket
Full OEM gaskit kit
Skyo Mount kit
Have a lot of work at my shop will get more pics up later...
Untitled by
89jdm240sx, on Flickr