Quote:
Originally Posted by Om1kron
Before you go spouting off uneducated shit.
|
I didn't "spout" any uneducated "shit"... I just said drag cars run them all day...
YOU are the one "spouting off uneducated shit"
hence-
EX: So what that pretty much means if the diameter of the stud is 1/2" it must stick out past the lug by 1/2".
WRONG!!
What the nhra rule books means.... If its a 1/2inch stud... the THREADS of the lug must seat INTO the lug the same or more! NOT sticking out the lug...
From what I've read... 1.5 times the width of stud is how deep the lug should seat on the stud, which is considered safe.