Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - This is the roll center, suspension pickup, and steering angle modification thread.

derass · 12-04-2012, 11:55 PM

whats it going to take to clear the frame rail once i go with MA knuckles? running 17x9 +20 with 235/40R17 and it was touching with only rack spacers. i do not want to sacrifice grip or safety (stretch) by going to 215/40r17. so extended lca, 15-20mm spacers, or combination of both? lip has already been hammer flat obv.

also can i prevent over centering by limiting angle, eyeballed with bump stops on lca? i will not be relocating rack, so offset rack spacers are my other option.

12-04-2012, 11:55 PM	#4875
derass Zilvia FREAK! Join Date: Jun 2010 Location: Toronto, ON Age: 33 Posts: 1,182 Trader Rating: (0)	whats it going to take to clear the frame rail once i go with MA knuckles? running 17x9 +20 with 235/40R17 and it was touching with only rack spacers. i do not want to sacrifice grip or safety (stretch) by going to 215/40r17. so extended lca, 15-20mm spacers, or combination of both? lip has already been hammer flat obv. also can i prevent over centering by limiting angle, eyeballed with bump stops on lca? i will not be relocating rack, so offset rack spacers are my other option.