|
XiaoAZN:
So you have a stock S13 spindle, with the 5-lug Ichiba hub conversion? I just wanted to make sure you were using a stock S13 spindle.
Front:
The S13 stock, has 13mm knurl studs stock.
The S14 stock, has 14mm knurl studs stock.
I'm also looking for an answer to this. I have S13 (stock) spindles on my S13, with the 5-lug Ichiba conversion hubs. I would like to get extended studs for my fronts without banging one out and messing with it. I might be able to pull the caliper and rotor and maybe measure some of the knurl if it comes through. I'll update if it comes down to it.
|