Quote:
Originally Posted by Dima1127
look for scarring on the the balls and the walls. but dont take it apart any further cuz you might not be able to put it back together. best bet would be it is check that all the balls are there. (no gaps between balls) and then put it on and make sure it spines nice and smooth with no wobble(after the big nut is tightened
|
so i just took off the hub and this popped off when i pulled the hub off. came from the front of the hub
i'm guessing the bearing is now damaged since that other piece came off when i pulled the hub off?
this is the back of the hub with that piece that i took off that sits in the bearing
this is how the whole hub would seat on the spindle when i put that piece back on that's supposed to be on the back of the hub. it stops at that point
and the spindle
