Quote:
Originally Posted by fliprayzin240sx
Yah, thats the only thing I'm not 100% about, since its on an RB and its an RB26 at that. The whole 2 stock MAF is what's I'm not sure about but you said this ones already converted to 1 single MAF.
Also, when you set to the same number on both side, thats usually the setting for stock MAFs. So you can set 1/1, 2/2, 3/3, etc for stock MAFs. With that said, I'm curious what it was set to originally with the single MAF conversion...
|
Should be 2-5....but again I hate AFCs...you're better off hitting yourself in the face with a hammer. Invest in the PFC, even a used one, a dusty ugly one from a junk yard or an old front clip, L-Jetro is even better. You'll thank me later...or you won't and you'll have a blown motor in a matter of time. AFCs are crap on Hot Wire Maf Cars. Sorry to be so blunt but passionate about it because I personally lost motors on my cars back in the day (2003) we still ran low 12s but screwing with the input for the MAF signal is not real tuning and is dangerous and throw extra resistance down the line to the ecm too. Just a few words of advice. Sorry if this breaks your heart too.
