|
its easy to fix this with a multimeter and a fsm
multimeter is a dub at sears
fsm is free to down load on net
check all those sensors against specs in fsm
also u need to check all wires where engine harness connects to chassis harness....
wire colors r free from frsport...
as far as a janky harness cut it open and tape it up....or solder broken wires and tape it up..use 3m temflex blk tape
most of the time is lack of voltage to engine harness=ecu..sensors...
__________________
 シチサｎ w/ka20det:in progress
シチサｎw/sr20det:stolen
|