Thread: This is the roll center, suspension pickup, and steering angle modification thread.
View Single Post
Old 08-26-2010, 02:23 PM   #1553
!Zar!
Premium Member
 
!Zar!'s Avatar
 
Join Date: Nov 2004
Location: North Korea
Posts: 14,576
Trader Rating: (27)
!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection
Regarding the centering rack thing with the offset spacer, or even without it for that matter.
Quote:
Originally Posted by assassin10000

Basically:

1. Install spacer/adapters on right/pass side.
2. Turn steering wheel all the way to the right/pass.
3. Adjust the right/pass side tie rod end length for the amount of angle you want.
4. Turn steering wheel until right/pass side wheel is straight forwards. (The left/drivers side should have some pretty decent toe-in at this point)
5. Adjust left/drivers side tie rod until left/drivers side tire is straight.
6. Center steering wheel (at hub, or steering shaft, ect). Set toe (in or out as desired).

Done.
That seems like the best way.
__________________
!Zar! is offline   Reply With Quote