|
PS1K_Nissan_S13_PnP_RevA is the map that im using. got it right from Haltech. changed the injector settings to high and thats the only change thats been made.
when trying to start it i have the fuel and ignition enabled. i know that im getting fuel and spark. just no start.
These are the settings in the haltech software
Main Setup
Main
Tuning Method: Injection Time
Engine Type: piston
Load Source: Map
Ignition Load Source: Map
Map Source: External
Max Cranking: 380rpm
Firing order: #1:1, #2:3, #3:4, #4:2
Trigger
Trigger Type: Nissan Optical
Trigger angle: 42.0
Trigger offset: 18
Trigger Edge: Falling
Home Edge: Falling
Trigger sensor type: hall effect
home sensor type: hall effect
trigger pullup: enabled
home pullup: enabled
home window: 16
trigger filter level: none
home filter level: none
Fuel
Injection mode: sequential
fuel pump prime time: 1sec
injector resistance: high
Ignition
Spark mode: direct fire
spark edge: falling
dwell mode: constant charge
dwell time: 1.9ms
hopefully someone can help. thanks.
mike
|