Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

NathanBerge · 01-01-2018, 05:39 PM

hi, im sorry if this has been solved before but i could not find anything. Im having a issue where my signal start wire has no power. i have check continuity from the fuse block to where it plugs into the ecu and i do have continuity to the wire. i am getting power to the fuse and it is not blown but still no power to where it plugs into the harness to the ecu any ideas?

01-01-2018, 05:39 PM	#1
NathanBerge Join Date: Jan 2017 Location: california Posts: 34 Trader Rating: (0)	signal start wire hi, im sorry if this has been solved before but i could not find anything. Im having a issue where my signal start wire has no power. i have check continuity from the fuse block to where it plugs into the ecu and i do have continuity to the wire. i am getting power to the fuse and it is not blown but still no power to where it plugs into the harness to the ecu any ideas?