Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - KA P/S Pump on SR20 ... SR Tensioner Needed?

Dorifto Machine · 05-26-2012, 07:50 PM

I'm fully aware that the KA power steering pump can be transferred to a SR bracket with the SR Pulley. However during searching and reading threads on swapping a KA pump to SR20 bracket it has not stated if you also need to swap the belt tensioners.

The reason I ask is because the SR20 I have does not have powersteering, so I bought the bracket and pulley form a zilvia member and he did not send the tensioner with it. I have my KA power steering tensioner but it seems only 1 bolt will line up...

Do I need to source for a SR tensioner or can I make the KA powersteering tensioner work?

Thank you for you time, much help is appreciated!

05-26-2012, 07:50 PM	#1
Dorifto Machine Zilvia Addict Join Date: May 2011 Location: Orlando Fl. Posts: 698 Trader Rating: (17)	KA P/S Pump on SR20 ... SR Tensioner Needed? I'm fully aware that the KA power steering pump can be transferred to a SR bracket with the SR Pulley. However during searching and reading threads on swapping a KA pump to SR20 bracket it has not stated if you also need to swap the belt tensioners. The reason I ask is because the SR20 I have does not have powersteering, so I bought the bracket and pulley form a zilvia member and he did not send the tensioner with it. I have my KA power steering tensioner but it seems only 1 bolt will line up... Do I need to source for a SR tensioner or can I make the KA powersteering tensioner work? Thank you for you time, much help is appreciated!