View Single Post
Old 01-29-2010, 06:10 PM   #1
Cscat87
Leaky Injector
 
Cscat87's Avatar
 
Join Date: Jan 2007
Location: Long Island, NY
Posts: 95
Trader Rating: (5)
Cscat87 is an unknown quantity at this point
How to remove SOHC PCV hose?

Hi everyone, I've been searching all day for an answer to this, and even looked in the Chilton manual, shop manual, etc. I replaced my PCV valve today on my SOHC, and naturally the hose broke off. I tried adding a hose coupler and a piece of new hose but the old hose is hard as a rock so you can't tighen a hose clamp onto it to secure the coupler.

So I figured the simplest thing to do is just replace the old crusty hose. Well I can't seem to see where it goes to? Obviously I know it goes to the oil/air separator on the timing cover, but I can't physically see it. Does anyone know to get this hose off without disassembling the entire car? Any help would be much appreciated since I think it is very important to have this hose connected.

Photo of what I'm working with:



Thanks everyone.

Chris
Cscat87 is offline   Reply With Quote
Sponsored Links