Quote:
Originally Posted by Mishkin_707
@killer, I would try it but I filled up to the top lastnight, but before I filled up I went all week without getting gas and ran this sucker till the gas needle was at 'E' and wouldn't start at all, I would have checked my cluster with my voltmeter but I couldn't find it and was too lazy to pull out the cluster for the millionth time
|
A lot of the times it will be the cluster contact points where the bulb housing locks into. I'd pull the cluster out and check the bulb, it's most likely gone bad if you've never changed it. This would be a good time to upgrade your cluster to LEDs. When you take the bulbs out make sure there is metal to metal contact on each housing, when I took my cluster out a lot of them had poor contacts and I had to clean it up.
Check out my thread I made couple years ago, it actually shows the gauge cluster lights on and no gas light!
#/f/chat/353488-gaug...-lighting.html