Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

gaz_moose · 09-20-2017, 12:18 PM

i had one come loose and one snap off, i drilled out a decent sized hole then turned up a threaded 'top hat' in the lathe then welded them in to the chassis rail. i did the same for the captive nuts as they also came loose.

09-20-2017, 12:18 PM	#5
gaz_moose Zilvia Member Join Date: Mar 2008 Location: engerland Posts: 242 Trader Rating: (0)	i had one come loose and one snap off, i drilled out a decent sized hole then turned up a threaded 'top hat' in the lathe then welded them in to the chassis rail. i did the same for the captive nuts as they also came loose.