Originally Posted by mikerbike

Are you using S13 coilovers and 12mm bolts on your S14 knuckles?

If so, there's a lot of room for the lower mount of the coilover and the knuckle to wiggle, since the S14 knuckle and shock mount use a larger bolt. S13 is 12mm and S14 is 14mm IIRC. I understand some company makes the inserts to use S14 knuckles with coilovers made for an S13.

But when you tightened them together, they probably weren't sitting the same, side to side.

If you have S14 shock mounts or have drilled out your S13 shock mounts to use S14 bolts or are using inserts, disregard this post.