$200???? WOW , took about 2 mins to install, its just the one nut you have to loosen, I dont remember if you have to turn the nut to the left or right to loosen it because you might or might not be on the opposite side of the thread,(so keep that in mind if you cant get it loose).. ..after its loose, just unclip the connector, then turn the old switch out till it comes out, insert new switch, before you tighten the new nut, make sure your pedal touches the new switch and pushes the rod all the way down, then tighten the nut and connect the connector.
I was thinking of just adjusting the old switch so it can come out more, but i was just thinking, if thats the lenght that was set it from factory, i shouldnt have to adjust it it to get it to work, but i still kept the old switch as a backup.....just look at the link i posted to the new switch it has a pic, and you ll understand completely how to remove it, it super easy
Quote:
Originally Posted by Z ya
awesome man, i'm pretty sure its my problem too.
the other day it did it again so i was able to test out the way you said, and when i held the button it started right up.
is it as easy to install as it looks? just plug and go? someone on nico was saying they paid $200 to have theirs installed at nissan wtf? lol 
thanks a lot silver350z05rb very helpful  |