Ok here is how it starts of... I have a s13 sr20 w/ cams, fmic, intake, exhaust, and safc... I had 550cc injectors on it, but was running stock t25. I was told that the 550s where too much for the stock t25, i opted to shelf them and install 370cc. I installed them fine and set the safc corrections to 0 as they where for the 550s. Now the car idles very very rough and when i drive it when i get to around 3k rpms the car just stops accelerating. And i shift to 2nd it picks up again but at 3k it stops accelerating. Then i go to slow down to u-turn back home and the car just shuts off.. then the only way to restart it is by holding the gas pedal down.
PLEASE HELP!!!
------EDIT
Problem solved THANKS to John and Steve... Wrong sensor type was selected on the afc.
to John and Steve!!