new 240 sx rotor problem
 

1990 240sx srt20det blacktop
6 puck clutch
300zx brakes all round
3inch down pipe
3inch test pipe
power by max coilovers
and more
https://www.youtube.com/watch?v=iv1AB5o_gKY

so guys I finally found a 240sx that fit my wants/price range but I've run into a few problems..

They guy who had her before me was a certified mechanic in el paso (which is where i bought it) He outfitted the car with the 300zx rotors, calipers and pads the problem is she is still a 4 lug. Ever since I got the car it shakes only when braking which leads me to warped rotors. the problem I running into now is no shop here will re drill rotors for the 300zx and i don't know where i can find a good set of rotors that fit and are 4 lug. I read a little about the altima rotors might fitting but i still don't know if it is the 26mm of the 30mm.

another thing is any one selling a wideband ;)

thanks guys

You really need to do research on what you have! That's a black valve cover, but its not what is typically called a blacktop. It's an s14s, so the gt28 should be stock on it, unless it was replaced.

This seems like an impulse buy, but just do research. Sellers usually want to dump their projects but you could ask the seller where he got the rotors?

Sent from a Highly Tuned Note 4.5!!!

You can buy them online everywhere. Here's a front set on ebay

http://m.ebay.com/itm/221668075593?_...25.m3641.l6368

It was replaced. Not an impulse buy. And I've tried talking to him no reply. Not buying eBay parts for my car....

if you buy through their website is it still considered an "ebay part"?