Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   Tech Talk (#/f/forumdisplay.php?f=8)
-   -   driver side tail light problem (#/f/showthread.php?t=650285)

Dunsparth 09-03-2017 04:48 PM

driver side tail light problem
 
Hey everyone somethings up with my driver side tail light in my s14.
i thought the tail was out so i replaced the bulb and it still didn't fix itself so i wiggled the connector to the tail light and than the running light turned on.
So i thought i had fixed it but its just the running light the brake light isnt working.
Does anyone know of a fix?

S-Nation S13 09-03-2017 05:06 PM

wiggling the connector would lead my to believe you harness is at fault. you have a break somewhere.

Dunsparth 09-03-2017 05:27 PM

Quote:

Originally Posted by S-Nation S13 (Post 6225579)
wiggling the connector would lead my to believe you harness is at fault. you have a break somewhere.

Can i buy a new harness for just the tail lights?

S-Nation S13 09-03-2017 05:28 PM

You can get a used one but if the break isn't at the bulb harness then you didn't fix the issue


Sent from my iPhone using Tapatalk

Dunsparth 09-03-2017 09:48 PM

Quote:

Originally Posted by S-Nation S13 (Post 6225582)
You can get a used one but if the break isn't at the bulb harness then you didn't fix the issue


Sent from my iPhone using Tapatalk

well its only the one side and if i jiggle the wire like i said it starts working..
i have no idea where to ever start with tracing the issue electrical especially wiring harness on vehicles is not my forte..
could it be a loose ground? should i get a volt meter and start testing the wires? replace fuses idk.

S-Nation S13 09-03-2017 10:06 PM

Replacing fuses wouldn't help . A fuse is either blown or not. Multi meter is going to be your best friend. Tracing wires isn't hard since they are color coded just time consuming.


Sent from my iPhone using Tapatalk

95_S14 09-03-2017 11:24 PM

Quote:

Originally Posted by S-Nation S13 (Post 6225623)
Replacing fuses wouldn't help . A fuse is either blown or not. Multi meter is going to be your best friend. Tracing wires isn't hard since they are color coded just time consuming.


Sent from my iPhone using Tapatalk

I'd eat a mile of shit to get to that asshole ^^^^^^^^^^^

S-Nation S13 09-03-2017 11:26 PM

Quote:

Originally Posted by 95_S14 (Post 6225635)
I'd eat a mile of shit to get to that asshole ^^^^^^^^^^^



Lol , I've had my fair share of problems damn wiring gremlins, pretty much got fed up and learned how to trace wire with the aid of the FSM.


Sent from my iPhone using Tapatalk

Standard 09-06-2017 10:45 PM

Gotta be the bulb socket itself, the metal tabs at the bottom and the side get pushed down too far over time and don't contact the bulb properly. Take a small pick and gently pry those tabs up/out to try and regain proper contact with the bulb, also use a SMALL amount of dielectric grease to cover the base of the bulb, good luck :)


All times are GMT -6. The time now is 04:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™