![]() |
Lsd
Hi i really kno close to nothing about 240s i was wondering wat lsds fit my car its a 95 240sx thanks guys.
|
240s have an R200 diff.....you can use a J30 VLSD, a S13/S14 VLSD, you can use a 300ZX VLSD with the axles, you can throw any R200 diff in there (not the R200 long nose diff though).
|
Quote:
Anything can be put into anything with enough fabrication, but he's right, a long nose is a not a straight bolt-in swap. |
Quote:
|
2way is the way:hsdance:......its worth every cent!!!!! if not go welded it gets the job done well if u want to drift!!!!
|
Thanks guys helped out alot
|
Lysergic Acid Diethylamide.....:wcc: ::tab::
|
^^^WTF does that have to do with this thread??? Stop fucking postwhoring in tech...
Anyways, are you asking stock VLSDs or aftermarket LSDs? |
Quote:
If you want to swap a whole diff housing, any R200 will work if you get a 1piece driveshaft with slip yoke, new bolts, and possibly axles. Reuse the rear cover. If you just want to swap the diff, then any R200 diff and output flanges will bolt in. You may have to enlarge the ring gear bolts to 13mm, and possibly new axles. |
Quote:
Quote:
LSD! are koo if you gots cash, welded diff ftw on da cheapssss I run a 180sx lsd in my s13 its nice for street and minor drifts at speed, low speed shit sucks in it... but welded is nice for low speed shit, and kinda scary if your BOMBING! down backroads, its not a high speed grip diff thats fo sho; all in all, try em all. no one can tell you what you like. I have tried em all. and once I get a G' to drop. KAZZ 2 way. all day. |
| All times are GMT -6. The time now is 07:56 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™