Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - CA S13 Hatch full part, lots of good aftermarket parts

- For Sale Items (https://zilvia.net/f/forumdisplay.php?f=10)

- - CA S13 Hatch full part, lots of good aftermarket parts (https://zilvia.net/f/showthread.php?t=489837)

S13 Hatch full part out, lots of good aftermarket parts, Z32 brakes

I only have the parts that are listed. The car itself is long gone.

I don't know what's going on here lately but everyone is asking for parts off the sold list. Check the sold list before asking. I will now ignore people that ask for sold stuff.

I have listed almost every part I can think of. If its not on the list I probably don't have it. I also have everything that is sold. If you ask for something that is sold I will ignore you for not reading the whole ad.

Text me for faster response
(714)422-4002

If you pm make the subject the part you want. "Parts" is not a good subject. That's a little broad and its hard to find your pm in all the other subjects tilted "parts"

I'm in Fullerton and a few parts are in Anaheim.

My SR20DET has a rod knock and don't have the money to keep fixing the car so I've decided to part it out.

Shipping:
If you pay with PayPal to have something shipped then add the 3%. You can gift it if you like also.
I will ship with USPS flat rate boxes to keep things simple. If it doesn't fit in on of those I will use USPS Priority boxes. If it doesn't fit in those I will most likey lag on shipping it and have to charge for the box.

Prices do not include shipping. I'd rather not ship things that are too big for USPS boxes.

PARTS LIST

Engine and bolt ons:

Water cooled Intercooler set up about 5k miles $250

SR redtop 02 sensor $15

Drivetrain:

ACT XACT ProLite Lightweight Flywheel for S13 S14 SR20DET link (less than 10k) $150

ACT 4-Puck Sprung Clutch Kit for the SR20DET link (less than 10k) $120

Steering and suspension: (this will not be pull until and least some time next week)

Carbon Fiber rear S13 Strut Tower Brace $25 no shipping

s13 Rear links $10 each

Brakes:

300ZX Front Brake Lines Conversion for S13 S14 240SX $25

Exterior:

Front turn signals $10

Misc.:

S13 Manual speed sensor for 5 speed swap $15

Manual drivers side window regulators $10

Wheels:

SE S14 wheels with bald tires $200

Aza wheels 17x? Offset ? I will get this info and decide a price

Jdm blest wheels fronts 17x7 and rears 17x8 not 100% sure on the sizes and not sure of the offset. These are the wheels I have on my rx7 so I'm still not sure I will sell them. $

Racing hart c5 3 piece wheels 17"x7" $200

SOLD LIST:
Everything from here down has been sold. It's is listed so I don't get a bunch of questions if I have unlisted parts.
Cat less test pipe about 5k mile $50 sold
**HKS sport Exhaust $250 sold
S14 front seats $45 each sold
Greddy bov $80 sold
Blitz intake $5 sold
Stance water pulley $80 sold
s13 89-90 pig nose bumper (modified to fit intercooler) $30 sold
S13 Stock Coolant Reservoir Tank $20 sold
S-Chassis Dual Caliper Kit Bracket (never installed) sold
S13 Pop Up Hood $40 sold
S13 Nissan Clutch Pedal $30 sold
Pop up motors $20 sold
Drivers door regulator $15 sold
Hood latch $5 sold
hicas front steering rack (fresh rebuild) $225
Climate control $30 sold
Power window switches $25 sold
SR20DET 5 speed Transmission $140 sold
300zx 30mm front brakes calipers $120 sold
SR Starter $45 sold
Fenders $40 sold
Lap belts, Auto belts, Rear interior panels, Door panels, Center console, S13 Dead Pedal, S13 Steering Wheel Undertray Trim Piece, dash $100 sold
SR alt and bracket $60 sold
Clutch Cylinder / slave cylender $10 sold
S13 clutch lines $10 sold
Power Steering pump $50 sold
Turbo inlet and outlet $10 sold
Chain tensioner $30 sold
Rubber Shift boot $5 sold
Power steering bracket $5
Drive shaft (s13 5 speed non abs) $40 sold
FiveO - 550cc Injectors $250 sold
SR Iavc $35 sold
SR tps $5 sold
nismo power brace $150 sold
Stealth Custom Fab S13 Front Strut Tower Brace with Z32 BMC support $75 sold
Stealth Custom Fab S13 Rear Strut Tower Brace $50 sold
Hatch Tail Lights $40 sold
Radiator core support and hood prop $50
S13 apexi n1 coilovers $650 sold
Apexi Power FC D-jetro with commander and sensors $990 sold
300zx Rear Brake Calipers $90 sold
Z32 Master Cylinder $80 sold
Z32 Brake Booster $50 sold
Shell $65.75 sold
S13 Power Window Motor $15 sold
Power Window Amp $5 sold
S13 jdm gauge cluster $60 sold
Glove box $10 sold
3" Megan Downpipe with bung welded in for wideband o2 sensor (no flex) $50 sold
Turbo outlet $30 sold
Redtop Ecu 62 $125 sold
Apexi 507-N009 Power Intake Kit Nissan 300ZX link (new in box) $80 sold
Steering rack (it's been used without power steering hooked up) $25 sold
Steering Column w/ Key $60 sold
S13 rear brake calipers $35
SR fuel rail $0 sold
Stock sr injectors $30 sold
SR20DET AAC Valve with fairly new gasket sold
SR20DET Valve cover $25 sold
Rear hatch $50 sold
Short Block with rod knock $100 sold
Sr igniter $50 sold
Nissan Quest alternator less than 3k miles with Cody ace kit $100 sold
Intake adaptor $8 sold
Head about 10k miles since rebuild $225 sold
Oil relocation kit $80 sold
tein inner tie rods $0 sold
Spl outer tie rods $100 sold
18g turbo $250 sold
Throttle body $20 sold
ARP SR20DET Engine Head Studs Bolts Kit $50 sold
SR20DET Coil pack cover $20 sold
SR Coil packs $75 sold
ISIS Exhaust manifold $100 sold
Koyo radiator $150 sold
Rear seat $30 sold
S13 Open diff 6 Bolt $35 sold
300zx Rear Brake Calipers $80 sold
5 lug front and rear conversion with new wheel bearings in front $250 sold
kaaz 2 way with s13 cover 6 bolt in pumpkin $550 sold
Chase Bays Power Steering kit for SR20DET SOLD
Earls Steel braided Turbo lines (turbo feed is goodridge) $30 sold
SR maf $30 sold
Z32 maf (super clean. This with the Apexi intake would be great for a KA turbo or SR'S wanting to make more power) $80 sold
SPL tenson rods $100 sold
Suspension Techniques Anti Sway Bars $250 sold

Got pics of da front n rear strut tower bars?

Quote:

Originally Posted by RSlayer (Post 5012370)

Got pics of da front n rear strut tower bars?

I will get some today.

If anyone need pictures let me know and I will try to get them up as fast as I can. All pictures will be posted on here and not to PM's.

I will also try and organize the pictures at some point.

sell me the starter and sr maf how much

Will the s14 wheels clear z32 break conversion on a s13? And im also interested on front 5 lug conversion and z32 break conversion lines do you rear as well?

Looking to buy the Front 5 lug conversion solely. Let me know.I texted you.

For the dome light, do you have just the cover?

Bump because that FD is beautiful!!!! Are the 30mm Z32's Iron or Aluminum???

I'm interested in the headlight/ turn signal switch for 25

By chance do you got radio brackets & din pocket

do you still have the subharness's for the license plate lights.
lmk thanks

Quote:

Originally Posted by Frankz91 (Post 5013661)

By chance do you got radio brackets & din pocket

I do not have those parts. Good luck with your hunt.

Quote:

Originally Posted by KOUKIboy (Post 5013392)

Bump because that FD is beautiful!!!! Are the 30mm Z32's Iron or Aluminum???

I'm pretty sure they are aluminum but ill doue check when I'm off work. They were on the car when I bought it so I just don't really know.

Quote:

Originally Posted by JaredNoel (Post 5013348)

For the dome light, do you have just the cover?

I have all of it.

are the racing hart wheels for sale?

Quote:

Originally Posted by ehhhregartless (Post 5013792)

are the racing hart wheels for sale?

Yeah. Ill be home in about an hour and I get a picture. They need some cleaning. There were stored out doors for a while

Quote:

Originally Posted by Twinkies! (Post 5014104)

Coilovers?

Apexi n1 with about 8k miles on them

thank you for the bracket fast respone and fast shipping

free bump for your stuff. thanks for the hood. nice meeting you.

interested if u have bothe fender liners....pm me the price of the 2
and also the exterior rubber on the roofhatch
thxx

bump for legit seller!. thanks for the bumper and misc parts lol!

pics of tail lights? also do they come with bulb bracket shit, center piece and the metal trim underneath?