Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   S Chassis (#/f/forumdisplay.php?f=97)
-   -   eye hole bolts (for harness install) where to get em? (#/f/showthread.php?t=342479)

CleanAndLegit 09-12-2010 06:14 PM

eye hole bolts (for harness install) where to get em?
 
where do you get em at, i dont really wanna order em from sparco or whatever
is there any other place to get them at?
i have 4 but theyre too big ): and wont fit
i understand that they are 3/8 or 14mm bolts fine thread so yeah
shoot me a good place
i already trieddd, harbor freight home depot, and ace hardware

codyace 09-12-2010 08:50 PM

It's blatantly obvious that not only are you cheap, but also lazy. Have you ever used google?

Impact Racing 50000021 - Impact Racing Harness Bolt-In Anchor Plates - Overview - SummitRacing.com


Install your harness properly, using the right hardware, and of course name brand belts. Why cheap out on a 6-10 dollar part when it involves your health/safety/well being?

CleanAndLegit 09-12-2010 11:45 PM

Quote:

Originally Posted by codyace (Post 3635379)
It's blatantly obvious that not only are you cheap, but also lazy. Have you ever used google?

Impact Racing 50000021 - Impact Racing Harness Bolt-In Anchor Plates - Overview - SummitRacing.com


Install your harness properly, using the right hardware, and of course name brand belts. Why cheap out on a 6-10 dollar part when it involves your health/safety/well being?

well reason i dont wanna get em from sparco is cause 1 i already have em and they are too big and 2 i wouldnt wanna buy them again only to find out they are too big, and i did use google came up with pretty much nada

and also i was trying to use the eye hole bolts cause its easier to get in and out... ahaha
and thanks thiough might just go with that

codyace 09-16-2010 03:19 PM

Why not just install them per specs, using the brand's suggested hardware, and then also installed properly in care.

Harnesses are meant for 'track' use. They should not be easy to get on or off.

jachien 09-16-2010 09:58 PM

takata has 2 different kinds. a short and a long.

CleanAndLegit 09-19-2010 07:43 PM

Quote:

Originally Posted by codyace (Post 3641965)
Why not just install them per specs, using the brand's suggested hardware, and then also installed properly in care.

Harnesses are meant for 'track' use. They should not be easy to get on or off.

well the thing is my harness came with the hooks and they are sparco... so infact if i were to locate the eyehole bolts then id beinstalling them properly... so yeah i dont really care for the easy off and on id just rather not spend more money on the things i in a way already have... so yeah i wanna know where to get the right eye bolts


All times are GMT -6. The time now is 11:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™