Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   Tech Talk (#/f/forumdisplay.php?f=8)
-   -   SR20 harness plug identification. Minimum wiring to make run. (#/f/showthread.php?t=437924)

KingSpence 02-26-2012 02:24 AM

SR20 harness plug identification. Minimum wiring to make run.
 
I figure about now would be a good time to tear into the wiring on the Corolla. It's an s13 redtop sr20det in a 1985 Toyota Corolla. I've got the harness pulled from the engine, and known plugs are marked. I need help identifying the plugs I am confused about, and which plugs are necessary to make the engine run. I want to open up the harness to lengthen and shorten as necessary, but I would also like to eliminate all unused plugs from the harness to not only make initial wiring easier, but any troubleshooting in the future as well. I'm not running a/c or powersteering, CONSULT, and aftermarket gauges throughout.

1-???? (plugs in between 3 and 4 intake runner)
2-AAC Valve maybe??? (plugs in between 3 and 4 intake runner)
3-Wastegate Valve control solenoid? Needed?
4-EGR Sensor? Needed?
5-????
6-????
7-????
8-????
9-H20 temp sensor. (found on the side of the head next to the throttle body.) Is this needed?

http://farm8.staticflickr.com/7192/6...8e33cfc8_b.jpg

http://farm8.staticflickr.com/7047/6...4d4e2529_b.jpg

http://farm8.staticflickr.com/7059/6...197b217c_b.jpg

http://farm8.staticflickr.com/7176/6...359ac5e6_b.jpg

http://farm8.staticflickr.com/7063/6...2abe6e44_b.jpg

http://farm8.staticflickr.com/7065/6...6435cf7a_b.jpg

http://farm8.staticflickr.com/7044/6...e36aa4b6_b.jpg

http://farm8.staticflickr.com/7209/6...85b115af_b.jpg

attracted 02-26-2012 07:55 AM

1..iacv
2..knock sensor
3..boost control
4..egr valve
5...i believe its p/s
6..7...8..test connector for the harness
9..water temp..ecu and cluster

minimum you need to run the engine would be

cas
water temp ecu
tps
maf/map
injectors
coils

iacv if you want idle
knock depending on ecu using...good tool to have

KingSpence 02-26-2012 12:14 PM

Quote:

Originally Posted by attracted (Post 4543798)
iacv if you want idle
knock depending on ecu using...good tool to have

What do you mean by this? Are you saying it's nessesary for the car to idle, or just a high idle on cold startup? I'm running a Central 20 tuned ecu.

Also, being in a Corolla, are the 6,7, and 8 engine check connectors going to help me at all with any troubleshooting, or should I just get rid of them?

deucenickeltre 09-28-2017 08:58 PM

boss thanks


All times are GMT -6. The time now is 04:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™