Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   S Chassis (#/f/forumdisplay.php?f=97)
-   -   Front driver side rumble/clunk sound (#/f/showthread.php?t=530202)

m_240sx 08-01-2013 09:49 AM

Front driver side rumble/clunk sound
 
1 Attachment(s)
So Tuesday I was driving to work. I hit a little bump in the road and I heard my front end make a pop sound. I stoped at the next stop light and at idle my car started making a clunking noise and a lille popping sound when I turned (left) so I pulled into a parking lot got out looked under my car and saw this (see attached photo. So that evening replaced the tie rod and boot. The noise isn't as bad now but its still there a little bit.. what else could it be? I greased the boot up very good. Do u guys think maybe it just needs to be driven a little to relubricate or something else?

For everyone information its a 92 240sx coupe lowered on Megan coilovers.

Sent from my HTC Droid DNA using Tapatalk 2

fast250sx 08-01-2013 09:53 AM

Check ur wheel bearing

m_240sx 08-01-2013 10:08 AM

Quote:

Originally Posted by fast250sx (Post 5366451)
Check ur wheel bearing

Ill try to check when I get home tonight.

Also I can feel it in my steering wheel.


Sent from my HTC Droid DNA using Tapatalk 2

Mikester 08-01-2013 11:53 AM

CHeck your ball joint too... and make sure the caliper is on good & tight.

m_240sx 08-01-2013 01:57 PM

When checking the ball joint what should I look for to let me know if its ok or not.

jabless13 08-01-2013 02:00 PM

Grab the wheel and shake it left and right and have someone else look for the ball joint to move. Also shake it at diagonal angles. Sometimes a ball joint will only have play a certain direction.

m_240sx 08-01-2013 02:20 PM

Quote:

Originally Posted by jabless13 (Post 5366741)
Grab the wheel and shake it left and right and have someone else look for the ball joint to move. Also shake it at diagonal angles. Sometimes a ball joint will only have play a certain direction.

Gotcha. Thank you for the tip. Ill try this to Ight if I get time Thx again.

Mikester 08-01-2013 02:45 PM

^^Grab the wheel at the top and bottom and try to wiggle it in/out... If it wiggles and is pivoting on the ball joint; it's toast.


All times are GMT -6. The time now is 09:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™