Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   Tech Talk (#/f/forumdisplay.php?f=8)
-   -   Idle Issues (#/f/showthread.php?t=558593)

burnout976 03-16-2014 11:23 PM

Idle Issues
 
Hi guys. Newbie here. Had my S15 since 2007. I recently cleaned out my throttle body and unknowingly removed my tps(dumbass). Went online and followed the adjustment procedures. Here is the problem. WOT..I adjusted it to 4.0v (It can go slightly higher). With the throttle fully closed, the voltage does not go lower than 0.6v. Now it idles around 1200-1400. When I clutch in, the revs go up. I can't seem to find a solution online. Everyone has a dropping rev issue but mine is a high rev one. Help please.

cotbu 03-17-2014 12:38 AM

Adjust the tps for closed throttle, .45v~ not WOT!

burnout976 03-17-2014 01:09 AM

Cotbu. That's what I meant. I adjusted the tps when the throttle was fully closed and the multimeter gave me a reading of 0.66v (the tps could not be adjusted any further). I then slowly opened the throttle and the voltage changed to 4.0v at WOT.

cotbu 03-17-2014 01:14 AM

try using an elliptical motion while adjusting, instead of just turning\twisting it, if that makes sense. g\l

burnout976 03-17-2014 01:29 AM

ok..will give it a try..thanks dude.

burnout976 03-17-2014 03:59 AM

I just remembered that my tps fits into a circular socket. it can only rotate forward or backwards..there is no way to do an elliptical motion.

cotbu 03-17-2014 01:40 PM

Tps adjusting is an art form, I guess?

Sent from my Highly Tune Galaxy S3.4!!!

X_JON_X 03-17-2014 02:20 PM

How did you clean your throttle body? Theres a chance you removed enough material where there isn't a very good seal and air is leaking through causing your high idle. Have you adjusted your IACV at all?


All times are GMT -6. The time now is 04:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™