Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (https://zilvia.net/f/index.php)
-   Chat (https://zilvia.net/f/forumdisplay.php?f=7)
-   -   King of doing it wrong. LOOK AT MY SPACERS! (https://zilvia.net/f/showthread.php?t=608775)

mhubeny180sx 07-28-2015 09:34 AM

King of doing it wrong. LOOK AT MY SPACERS!
 
http://i166.photobucket.com/albums/u...psrvqf045l.jpg

Hey guys I've attached some pics to show you what I'm trying to deal with, circled in red are the spots im getting major rub on the back tires, and on the front wheels also circled in red is where my tires are rubbing very hard on my front fenders when i turn, I have the little over fenders shown in the last pic, but I dont really wanna just jump in and start cutting my fenders without some tips or advice, because even if i do cut them, the front wheels are rubbing on mount points for the front bumper kit and the side skirts where they bolt on. Its already sitting pretty high, I just want some tips on how to make it work at this height, and what you guys would do to make it go lower, without changing tires every 50miles from cutting lol. I do wanna keep this offset though.
IF YOU ARE GOING TO BE RUDE MOVE ALONG, CUZ IM BORED OF REK'IN AMATEUR TROLLS 2EZ KTHXBAI
Rears showing fender rub

http://i.imgur.com/8a0jKxQ.jpg

http://i.imgur.com/kL6zbO1.jpg

Fronts

http://i.imgur.com/6SuUSSu.jpg

http://i.imgur.com/hHRixyP.jpg

And the old z flares that will be installed, might also just put v2 rb flares not sure yet.

http://i.imgur.com/F2jjGOc.jpg

Sileighty_85 07-28-2015 10:11 AM

Remove your 50mm spacers add a little camber and that should fix your issue.


Why run that much of a spacer for some what looks like 8.5J wheels just to use those flares?


If you had some 11J wheel I could understand that.




Looks retarded.

silviaks2nr 07-28-2015 10:14 AM

Why do you have huge ass spacers? It looks retarded. Tires are way too tall for a 240 that low too. This is another case of don't do something unless you know what the fuck you're doing.

mhubeny180sx 07-28-2015 10:37 AM

Quote:

Originally Posted by Sileighty_85 (Post 5916039)
Remove your 50mm spacers add a little camber and that should fix your issue.


Why run that much of a spacer for some what looks like 8.5J wheels just to use those flares?


If you had some 11J wheel I could understand that.




Looks retarded.

its a 9.5 in the front and 10.5 in the rears

Sileighty_85 07-28-2015 10:44 AM

those pics are very deceiving then. regardless if you have to run flares cuz you are using 50mm spacers it looks stupid.

mhubeny180sx 07-28-2015 10:50 AM

Quote:

Originally Posted by Sileighty_85 (Post 5916061)
those pics are very deceiving then. regardless if you have to run flares cuz you are using 50mm spacers it looks stupid.

ok but im asking for suggestions on how to make it work, dont care what you think of how it looks because it doesn't even have the side skirts or bumper on if i wanted to know how you think it looks I would ask what people think, you don't see me looking at your avatar and saying your face looks stupid right? If you don't have anything constructive to say or an answer to what im looking for they why bother commenting? post count? god... :picardfp:

Sileighty_85 07-28-2015 11:07 AM

I already told you, remove the 50mm spacers and add some camber.


Bumper and side skirts aren't gonna make that look any better.


post count? That means nothing to me.


Im trying to help you from destroying a perfectly nice S13 and making you look like an idiot when ppl look at your setup.

mhubeny180sx 07-28-2015 11:13 AM

Quote:

Originally Posted by Sileighty_85 (Post 5916075)
I already told you, remove the 50mm spacers and add some camber.


Bumper and side skirts aren't gonna make that look any better.


post count? That means nothing to me.


Im trying to help you from destroying a perfectly nice S13 and making you look like an idiot when ppl look at your setup.

http://i.imgur.com/eEH7Dxo.jpg

yeah you're right that looks SOO retarded lol... god u have no taste.

Sileighty_85 07-28-2015 11:31 AM

Yeah, good luck with your version...


Ok yeah I have no taste (Sarcasm)

omgRWDgoodness! 07-28-2015 12:26 PM

If having "taste" means not having glass on the car, then yeah I guess I don't have any taste either.


Retards...

OBEEWON 07-28-2015 12:47 PM

"Doc it hurts when I do this..."

turbo2nr 07-28-2015 12:48 PM

This guy should move to Florida...

greddy2die 07-28-2015 01:30 PM

Ughhh no please not Florida, there are already plenty of other people here ruining it for the small minority of us not doing it wrong.

5280VertDET 07-28-2015 01:30 PM

Here's the deal dude, you will have to cut your panels AND get over fenders or flares.

End of story.

turbo2nr 07-28-2015 01:41 PM

Give RWB a call and see how to stack spacers to get the "look" you want to achieve.

ILoveJDM 07-28-2015 01:48 PM

another classic case of I saw it on the internet, and I have zero idea of how to build cars.

deolio 07-28-2015 01:53 PM

you can't leave it as-is and not have any rubbing. contrary to popular belief, offset isn't everything. remove the dumbfuck spacers, pull the fenders (please have a professional do it), lower the car, and add some camber.

1on1 07-28-2015 01:55 PM

Don't bother putting flares on stock body. Car will not flow. Also, the car you posted is...whatever and I don't understand the rear lip spoiler when he has a gt wing....but its just an opinion.

I would rather drive a stock body s-chassis with wheels and rolled fenders before you destroy your rear qtr panel (assuming the other side is fine).

If you're thinking of getting any aero in the future, I suggest going with sileighty_85's suggestion until you acquire the pieces so you can look at it and decided to go with it or not.

Take the advice or not, this is what you wanted.

mhubeny180sx 07-28-2015 01:59 PM

Quote:

Originally Posted by 5280VertDET (Post 5916154)
Here's the deal dude, you will have to cut your panels AND get over fenders or flares.

End of story.

ok, thank you. glad someone said something helpful other than be jealous of my spacers that cost more than their wheels lol.

Quote:

Originally Posted by turbo2nr (Post 5916162)
Give RWB a call and see how to stack spacers to get the "look" you want to achieve.

RWB ?

greenwood 07-28-2015 01:59 PM

Dog hang time is the best http://i.imgur.com/8a0jKxQ.jpg

I miss my boy so much. Wish I could have spent more time with him :picardfp:

Enjoy your time with them my man and do whatever you want to your car, it's YOUR CAR not theirs.

http://thewolfweb.com/photos/00530421.jpg

deolio 07-28-2015 02:12 PM

http://i31.photobucket.com/albums/c4...psssh2u4wl.jpg

dizzariot 07-28-2015 02:14 PM

Hahahaahahahaha and this is the asshole bashing FS threads. What a fucking tool. You can't even be a StanceQueen without fucking training wheels.

japslapsilvia 07-28-2015 02:15 PM

Quote:

Originally Posted by mhubeny180sx (Post 5916173)
ok, thank you. glad someone said something helpful other than be jealous of my spacers that cost more than their wheels lol.



RWB ?

:picardfp: wow....just wow.

ILoveJDM 07-28-2015 02:19 PM

Quote:

Originally Posted by mhubeny180sx (Post 5916173)
than be jealous of my spacers that cost more than their wheels lol.


=

This is the problem with people these days. Are you actually bragging about using spacers? wtf

People aren't hating because they're jealous, your car actually is terrible.

mhubeny180sx 07-28-2015 02:29 PM

whats wrong with buying custom high end spacers to fit wheels I like?

Like i said, more than ppls wheels:
http://i.imgur.com/QQtOZwu.png

Sorry my car is full of only quality parts 55,000 original kilometers 180sx brick front end, its not shit m8.

lol sorry i didnt wash, add a filter to my ipad photo, and put all my aero pieces in my "need help" pictures lol

jsu1012 07-28-2015 02:36 PM

way to go.. now your dog hates you.

http://i1231.photobucket.com/albums/...psznh0kcsd.jpg

japslapsilvia 07-28-2015 02:40 PM

Quote:

Originally Posted by mhubeny180sx (Post 5916205)
whats wrong with buying custom high end spacers to fit wheels I like?

.


umm they dont fit, if they did you wouldn't have posted

Almighty So 07-28-2015 03:02 PM

Quote:

Originally Posted by mhubeny180sx (Post 5916205)
whats wrong with buying custom high end spacers to fit wheels I like?

What's wrong? they don't fit hahaha

Quote:

Originally Posted by mhubeny180sx (Post 5914782)
hahahha maybe someone will feel sorry for you lol and donate some money to take this stuff to the dump for you. This is why I dont post here toxic teenagers like you with swagged out slammed to piss dildo shifter crown royal sticker bomb crew that ruin nissans one car at a time.

hey man, at least those kids know how to get their cars "slammed to piss" by themselves.

mhubeny180sx 07-28-2015 03:02 PM

Quote:

Originally Posted by japslapsilvia (Post 5916214)
umm they dont fit, if they did you wouldn't have posted

they will fit. seems like most ppl here is mad about my spacers and wheels and cant understand simple english and hate my idea of a car rather than suggest something constructive, if i wanted to have the rolled fender look like every 240 fanboi I wouldnt have gotten the spacers or these wheels. So i guess i need to state myself again.

I intend on keeping this width/offset
Ride height - no it doesnt need to be fanboi slammed nor do i want it to be
I will be using the z fenders in the pic or rb v2 fenders
suggestions on what to do plz n thks

mhubeny180sx 07-28-2015 03:04 PM

Quote:

Originally Posted by Almighty So (Post 5916229)
What's wrong? they don't fit hahaha



hey man, at least those kids know how to get their cars "slammed to piss" by themselves.

dude u dont even have a running car, all u got is ur zilvia account and ur rusted fake c's shifter with missing boot and fake brides lol.


All times are GMT -6. The time now is 08:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™