Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

- Builds (and builds only) (#/f/forumdisplay.php?f=131)

- - Mannykiller's Fd Street/Drift build (#/f/showthread.php?t=483478)

Mannykiller's Fd3s Drift build project: #Thisisthewolf

Whats up guys, well first off my name isn't manny. Its Aaron P..... mannykiller is just a name I came up for forums because I had a guy try to sell my motor out of the shop he owned. His name was manny...and was a little philipean guy that I would deck in the jaw if I ever saw him again. Either way I got my stuff back thanks to some guys ratting out his location and the location of my stuff. Onto the good stuff though. I bought a Fd almost 3 years ago and blew an oil control ring about a year into that. I've been building the car for almost 2 years now and it's getting close to being finished. I figured i'd share my build with you guys. I love drifting, and I love dricing on the steet. Yes I live in CA about 20 min from Willow Springs international raceway..so just drift and all the good stuff is very close to me. I also enjoy track days and time attack... I've geared this build towards being able to let me participate in all the fun stuff. So onto the good stuff. The pics...
Epic build opener
http://i804.photobucket.com/albums/y...d/SDC12487.jpg
me ane my buddy Evan pulling the motor
http://i804.photobucket.com/albums/y...d/SDC12492.jpg
http://i804.photobucket.com/albums/y...SDC12493-1.jpg
http://i804.photobucket.com/albums/y...d/SDC12494.jpg
before
http://i804.photobucket.com/albums/y...SDC12496-1.jpg
http://i804.photobucket.com/albums/y...d/SDC12507.jpg

Well I guess I should list the things i've done to the car thus far..

Engine:

13B-Rew
Built and Large Street ported by Howard Coleman
Dynamic balanced Rotating assembly by Atkins Rotary W/ low mileage rotors
NRS 1pc 3mm Ceramic Apex Seals
Power FC
Rywire Mil-Spec Engine Harness W/Cannon Plug at Fire wall
Oil Metering Pump Delete
Exedy Twin disc cerametallic clutch
One off Virtual Works Upper Intake Manifold
Excessive Manufacturing Lower intake manifold
Full Function Engineering Primary/Secondary Fuel Rails
-6AN Push Lock hose and fittings
Edelbrock 74MM Throttle Body
I.D. 850 Primary, I.D. 2200 cc injectors
2X Bosch 044 Fuel Pumps
CJ-Motorsports Dual pump Hanger
Aeromotive Fuel Filter W/shut off valve
Dual 25 Row Mocal Oil Coolers w/braided Line
Custom Power steering Relocation
Custom Coolant filler neck
Custom Divided Turbo Manifold with Dual gate ports
2X Synapse 50mm Waste-gates
2X CX racing Intercoolers...one used as I/C the other was converted into a dual Pass Radiator.
Tial BOV
GTX3582R turbo
Custom charge tubing
Custom 4" DP & Exhaust
Powered by Max Dual EGT kit with 2x EGT displays

Suspension/drive-line
Stance XR coilovers custom valved W/swift Springs 8/10
Full Super-Pro Bushing kit installed
New rear Wheel bearings
All new Pillow Ball Bushings
ARP extended Wheel Studs
Turbo 2 Clutch Type LSD unit
OEM FD trans
PBM Angle Kit W/rack spacers
Sake Bomb Garage S/S braided brake lines
Rebuild OEM calipers
ABS Delete Kit
Memory Fab s68 Carbon Seat
OMP Corsica 330

and more but honestly i'm kinda sick of trying to remember what's been done or bought..
May or may not be forgetting something...anyways onto the pics!

Sand Blasted all my suspension
http://i804.photobucket.com/albums/y...131_170222.jpg
http://i804.photobucket.com/albums/y...d/SDC12506.jpg
http://i804.photobucket.com/albums/y...208_213114.jpg
painted suspension arms & sub frame
http://i804.photobucket.com/albums/y...9-15190541.jpg
http://i804.photobucket.com/albums/y...23193624-1.jpg

dam i like! i love FD builds deff in for updates! keep it coming!:0

and love the gold man!! looks good!

wish i had an FD, ill be watching this one! looking good so far.

Radiator mount
http://i804.photobucket.com/albums/y...d/IMAG1030.jpg
got some more rears Advan TCIII's =-) 18x11 +15
http://i804.photobucket.com/albums/y...d/IMAG1047.jpg
baught a new daily.. 2012 prius...yea yea yea...hate all you want.. but i truly feel like it's the best investment i've ever made haha. all I need is some 15x7 RPF1's now...lemme know if anyone comes across some and wants to sell em..!! averaging 517-520 miles per tank..(9.7ish) gallons. Beat that!
http://i804.photobucket.com/albums/y...d/IMAG1058.jpg

Made a custom Coolant filler neck
http://i804.photobucket.com/albums/y...d/IMAG1139.jpg
Shineauto Feed fenders..+20mm
http://i804.photobucket.com/albums/y...d/IMAG1207.jpg
OMP corsica came in.... 330mm =-) love this wheel!
http://i804.photobucket.com/albums/y...d/IMAG1193.jpg
Radiator Mount
http://i804.photobucket.com/albums/y...ps8ce9b6a7.jpg
http://i804.photobucket.com/albums/y...ps60cd6e23.jpg
-16AN fittings for coolant
http://i804.photobucket.com/albums/y...d/IMAG1140.jpg

Mock..YEAAA.....ING.......YEAAA....BIRD... jk..but seriously name that movie..
http://i804.photobucket.com/albums/y...d/IMAG1273.jpg
Looking good..and coming along
http://i804.photobucket.com/albums/y...d/IMAG1258.jpg
Making sure we have clearance for the turbo mani..
http://i804.photobucket.com/albums/y...d/IMAG1276.jpg
Looks good so were go for tacking
http://i804.photobucket.com/albums/y...d/IMAG1289.jpg
http://i804.photobucket.com/albums/y...d/IMAG1292.jpg
90% finished manifold
http://i804.photobucket.com/albums/y...d/IMAG1293.jpg
http://i804.photobucket.com/albums/y...d/IMAG1295.jpg
mmmmhmmm
http://i804.photobucket.com/albums/y...d/IMAG1299.jpg
Downpipe mock up..it's a squeeze..
http://i804.photobucket.com/albums/y...d/IMAG1285.jpg
http://i804.photobucket.com/albums/y...d/IMAG1282.jpg
Tack tack tack... fender wells for over fenders
http://i804.photobucket.com/albums/y...d/IMAG1290.jpg
http://i804.photobucket.com/albums/y...d/IMAG1287.jpg
Silocone sealer to keep the shiiii out
http://i804.photobucket.com/albums/y...d/IMAG1296.jpg
Turbo Charge side of IC welded
http://i804.photobucket.com/albums/y...d/IMAG1314.jpg
http://i804.photobucket.com/albums/y...d/IMAG1318.jpg
Made some Screamer pipes for my wastegates, still need to cut them and pretty them up but they're going to the atmoshpere
http://i804.photobucket.com/albums/y...d/IMAG1325.jpg
http://i804.photobucket.com/albums/y...d/IMAG1313.jpg
Cut a plate for my cannon plug for the Engine wiring harness.
http://i804.photobucket.com/albums/y...d/IMAG1304.jpg
just need to tack it onto the firewall
http://i804.photobucket.com/albums/y...d/IMAG1306.jpg
brought my old exhaust and oil coolers to make sure they fit... but decided that i'm trashing the whole exhaust.. and going with a new system. 4" all the way to try to get everything we can out of the gtx35r. If any of you guys are familiar with HP turbo ratings..For rotary.. you take whatever the turbo is rated for and you divide it by 1.3 "13b-rew" displacement. So almost maxing out this turbo is my goal. I'd like to get the broadest power-band possible. WHP under the curve! My power goal is 450-480WHP. I'm also trying to make the most power at as low a PSI as possible. Efficiency wise..it'll just be better if we can make 450WHP at say 20PSI compared to 25PSI. Less stress=better reliability.
anyways..back to pics..
Oil coolers. 25Row Mocal's
http://i804.photobucket.com/albums/y...d/IMAG1317.jpg
Line routing.. surprisingly everything is going to fit without modification.. THANK GOD!
http://i804.photobucket.com/albums/y...d/IMAG1331.jpg
And finally mounted
http://i804.photobucket.com/albums/y...d/IMAG1329.jpg

SO this is where I currently am in regards to progress with the build. Hopefully I'll have some more updates soon.
Just ordered my Radiator -16AN fittings today so they should be in from summit this week. Other than that.. just tidying up some loose ends.

Nice, been watching your build since you started it on RX-7 club. Great attention to detail. Keep up the good work.

keep up the good work.

Hey thanks man! I've learned a ton from 7club...but they seem to be a little close minded.
I got a few more pics of this past weekend and Allstar bash. Just for kicks..becuase everyone loves pics..
Me and my best buddies
http://i804.photobucket.com/albums/y...r/IMAG1057.jpg
facebook profile pic..haha
http://i804.photobucket.com/albums/y...r/IMAG1218.jpg
some All Star Bash footage
http://i804.photobucket.com/albums/y..._VIDEO0078.jpg
Mick
http://i804.photobucket.com/albums/y...r/IMAG1338.jpg
randomness
http://i804.photobucket.com/albums/y...r/IMAG1335.jpg
http://i804.photobucket.com/albums/y...r/IMAG1336.jpg
http://i804.photobucket.com/albums/y...r/IMAG1337.jpg

this build is awesome it makes me want a fd even more now

btw the guy that sold/stole your motor, did his last name happen to be pacquiao? anyways nice build.

nahh....haha. He almost sold the motor to someone else. I caught his ass and busted him. It was with an entirely different chassis anyways...some 8-9 years ago. I'd still deck his ass in the jaw though... that guys a low life.

this build is the illest i've seen in a while

this build is phenomenal

love the fab work, esp the intake manifold. keep it up!

Love FD's, with the exception of the wheels (To much dish for my style) this build is dope :cool:

Love this build,, Can't wait to see the finish car..

Been watching your build on 7club. Very nice work, keep it up!

I miss my 93' R1 Black FD so much. I commend your decision to keep the rotary. Can you tell me more about the motor? Which seals did you go with? Street Port? Bridge Port?

god man this is sweet!

Quote:

Originally Posted by scottie (Post 4961818)

I miss my 93' R1 Black FD so much. I commend your decision to keep the rotary. Can you tell me more about the motor? Which seals did you go with? Street Port? Bridge Port?

Hey thanks!

The motor was built by Howard Coleman (Coleman precision rotaries). Its a large street port that is supposed to make 500whp at 20-22lbs. I'll be keeping it a little lower than thatfor reliability. But the seals are NRS ceramic apex seals, 1 piece, 3mm..they were really expensive :-\ but they should take care of business.