What hose to Rb25 waste gate?
 

I read on a few forums that I could use one of the vacuum hoses from the intake manifold and connect it to the waste gate is this correct? Or how should I set it up. I don't have the charcoal canister it didn't come with my swap(rb25 series 2) any advice would be greatly appreciated thanks.

Typical setup is a 1/4" vacuum line routed from the intake manifold to the wastegate.

would it be this hose coming from the intake manifold

http://i24.photobucket.com/albums/c4...t/IMG_0867.jpg

you could tap it somewhere on the hot pipe close to the turbo. and that should be fine. i did that when i swapped rb25 turbo on my rb20