BiG MiKE's Little Build! (2JZ-GTE Powered)
 

So as some of you know I recently parted out my SR in hopes of going with something more reliable and with much more power potential. So it was time to get rid of this paperweight and make space for something in an inline 6 :)

http://i41.photobucket.com/albums/e2...313-1611-1.jpg

Then I sold my beloved BBS's
http://i41.photobucket.com/albums/e2...10928-1655.jpg

And this is how she sat for a bit
http://i41.photobucket.com/albums/e2...20914-1820.jpg

Til I got these 17x9.5+15 / 18x9.5+15 MB Battles to roll on (not the greatest but they wuz cheap)
http://i41.photobucket.com/albums/e2...21010-1711.jpg

Stetched some rubber on em...
http://i41.photobucket.com/albums/e2...21016-1807.jpg
http://i41.photobucket.com/albums/e2...21015-1841.jpg

Then it was time to empty the bay and rip the front end off - here is where we stand now
http://i41.photobucket.com/albums/e2...21021-1800.jpg\
http://i41.photobucket.com/albums/e2...21021-1801.jpg

Pulling as much as I can so we can get a nice coat of paint in the bay. Ill be picking up my 2j/R-154 this weekend and hopefully dropping her in to check fitment and decide if I am going to trim the radiator support for a bit more clearance. This isnt much of a build just yet (more of a demolition) so ill just throw in a few pics of the goodies that started rolling in this week.

Treadstone Cast Manifold
http://i41.photobucket.com/albums/e2...21114-1718.jpg

Precision 6266 .68a/r with 3-5/8" V-Band discharge
http://i41.photobucket.com/albums/e2...21114-1714.jpg

Xcessive engine & Trans Mounts
http://i41.photobucket.com/albums/e2...21114-2128.jpg

Tial MV-S, TRD Thermostat, and TRD Oil Filter
http://i41.photobucket.com/albums/e2...21107-1731.jpg

Complete 2JZGTE gasket set including water pump, idler pulley, tensioner, etc,!
http://i41.photobucket.com/albums/e2...21114-2130.jpg

So thats pretty much it for now. Ill be taking more pics as things come together... Until the next update :)

Didnt do much this weekend just picked up motor/trans and sent it to a buddys house for all new front seals/tensioner/timing belt/water pump/etc... Then she came home and I havent really done anything yet. I will be pulling off the stock twins this weekend and ordering some fuel components this week as well.
Pic of the shifter extension done by a local shop that S&O Teck (where I bought my engine/trans) sent it to be done...

http://i41.photobucket.com/albums/e2...21119-1816.jpg
http://i41.photobucket.com/albums/e2...21119-1816.jpg

More pics/updates coming soon

Hardparked...
http://i41.photobucket.com/albums/e2...21118-1456.jpg
http://i41.photobucket.com/albums/e2...21118-1454.jpg

-----------------------------------------

So I found some motivation and decided to tackle the twin turbo removal... boy what a pita... After removing those I put on the treadstone manifold and turbo for a little mockup

http://i41.photobucket.com/albums/e2...21120-1917.jpg
http://i41.photobucket.com/albums/e2...21120-1916.jpg
http://i41.photobucket.com/albums/e2...21120-1916.jpg
http://i41.photobucket.com/albums/e2...21120-1915.jpg

SO much more room with a single! Anyone thinking of doing this swap, do yourself a favor a ditch the twins. I pulled them off with the engine out of the car and it was a nightmare... I couldnt imaging doing this after the engine is in that tiny bay

Shout out to this can of AERO KROIL for without you those silly twins would still be stuck to my 2j

http://i41.photobucket.com/albums/e2...21120-2013.jpg

AERO KROIL > WD-40 :D

Thats all I haz for now

Looking good ;)

Bump for a cool dude, can;t wait to see it all finish!

Cool man, lookin good.

U ever use pb blaster? I've never heard of aero Karol ill have to try it.

how much did you extend the shifter and what tranny is that? R154?

Ive tried PB before but this AeroKroil works better than anything ive ever used

A local shop did the extension for me. Yes it is a R154 - I can take a rough measurement of the plate that was added if that helps you

Thanks for the comments guys

Just ordered a Wiring specialties Harness + Patch harness from Yury

More progress pics next week

Thats pretty cool dude :) those wheels are savage :)

what kind of response are you expecting from the turbo, around what rpm you going to see full boost?

KROIL FTMFW!!! I got my subframe off with that shizz. It's the business

Looking good bud! I'm excited to see how you have everything planned out. That turbo is gonna hit pretty hard, he should see 15-20psi around 3500

^ werd
That manifold is what's gonna make some nice power early on that's for sure. Nice setup

Like Flicktitty said im guessing around 3500rpm which IMO would be pretty awesome for this sized turbo

Thanks - Im taking serious notes from your build thread :)

Fuel Injector Clinic 775cc High Impeadance Injectors + -6an Dual Feed fuel Rail ordered :)

I just need an R154 trans mount so I can do some test fitting now

definitely miss the bbs

nOw that the world hasnt ended... the build will commence http://www.sfldrifters.com/forums/im...lies/smile.gif

Ran into some issues with the crappy treadstone manifold machining that I had to address before I buttoned up the exhaust side

Pics and details coming this weekend as well as some heavy progress

It hasn't not ended yet :tardrim:

Anyway, I will be watching o.0

Well I havent done much....

Installed Marlin Crawler Shifter bushings which took soooo much play outta the shifter. This is a must have upgrade for anyone who doesnt already have it.

Started installing driftmotion pulleys and Im currently working on finishing the stripping and painting of the engine bay

Here are some shots of the machining that had to be done on the turbo to fit the treadstone manifold

http://i41.photobucket.com/albums/e2...ps6722e045.jpg

Holes slotted to slide turbo over about 2-3mm

Original fitment
http://i41.photobucket.com/albums/e2...ps632c3f31.jpg

http://i41.photobucket.com/albums/e2...psc84a374a.jpg

Had to go with Socket Head Cap Screws due to hex heads not fitting

http://i41.photobucket.com/albums/e2...ps583273e7.jpg

2-bolt to V-band wastegate adapter installed

http://i41.photobucket.com/albums/e2...ps528ad292.jpg
http://i41.photobucket.com/albums/e2...ps1c258164.jpg

Wastegate installed :)

http://i41.photobucket.com/albums/e2...ps6856b3f1.jpg
http://i41.photobucket.com/albums/e2...psa1b21e1d.jpg


Then this shows up today via Santa (UPS) fresh from Yury's (wiring specialties) workshop
http://i41.photobucket.com/albums/e2...ps5a44b072.jpg
http://i41.photobucket.com/albums/e2...ps511745f9.jpg

Harness comes ready for the Dakota Digital Boxes :)
http://i41.photobucket.com/albums/e2...psd27cc70f.jpg
http://i41.photobucket.com/albums/e2...ps54a811dd.jpg

Also picked up one of these so that my sweet ass harness stays uncut and clean
http://i41.photobucket.com/albums/e2...ps6713cace.jpg

Ive gotta say Im impressed with the quality of this harness... cant wait to install it and fire it up

Thanks Yury!

^Very nice progress! Props on going with a clean harness setup! That will make a world of difference.

That harness = a big pair of titties.

Keep it up

Let us know when u install ur harness. i'm kind of hoping yury have the race harness version asap, pretty much mill spec:) either that or ryan's aka rywire.

Just received dry pearl for engine bay paint! updates this weekend if it doesnt rain

Got some pics ill upload later as well

Did some work on the engine bay a few weeks ago now mostly prep work for paint and removal of battery tray and other useless brackets

Degreasing and removal of brake booster and other parts
http://i41.photobucket.com/albums/e2...psde2a16aa.jpg

Battery tray removed
http://i41.photobucket.com/albums/e2...ps037f93e2.jpg

Misc brackets removed
http://i41.photobucket.com/albums/e2...ps62a7e071.jpg

Bit of sanding done
http://i41.photobucket.com/albums/e2...ps4cc6921e.jpg

Ordered some dry pearls (Green/Blue/Purple Chameleon for engine bay) and Green/White glow in the dark to experiment on the wheels :)

Shooting for the one on the right
http://i41.photobucket.com/albums/e2...ps94102b8d.jpg
http://i41.photobucket.com/albums/e2...pscda9efdb.jpg

After a few mins of light...
http://i41.photobucket.com/albums/e2...ps2675bb14.jpg
http://i41.photobucket.com/albums/e2...ps6224da5d.jpg

More updates this weekend once we lay down some paint

that turbo is pure art

Attachment 50220
Engine bay officially painted and ready to receive an engine!

That engine bay looks nice man!

Thanks :) pics don't do this paint any justice tho
Attachment 50222
That's the black base coat before the pearl

omg. that pearl engine bay is frickin amazing. the whole build is going to be fantastic. keep up the good work man

Thanks guys ill have some engine related updates this week now that the bay is ready!

looks goos so far Mike cant wait to see how its goes