Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   Tech Talk (#/f/forumdisplay.php?f=8)
-   -   S14 Passenger Headlight Not Working (#/f/showthread.php?t=678041)

MyNameIsOllie 11-12-2020 10:31 AM

S14 Passenger Headlight Not Working
 
Hello,

Just recently got my S14 import and the only issue real is that the passenger side main beam doesn't switch on.

I started by checking the fuses and each were fine.

I then switched each component to the driver's side (which works fine) from the passenger's side one at a time to find if there was a faulty bulb or HID ballast/ignitor. The oddness started when the components which weren't working on the passenger side all worked on the driver's side.

I busted out the multimeter and started checking for voltage at each connection on the passenger side, and the HID ballast and ignitor combo (which was working on the driver's side) was passing no voltage through to the bulb (which was also working on the driver's side).

After that failed, I bypassed the HID entirely with a standard H1 bulb and even that wouldn't come on, despite the fact the connectors had 12v running through them.

Has anyone had this issue? I am guessing this could be a faulty ground or something? Honestly, I do not have a clue.

Any suggestions of what I could try next would be much appreciated!

Thanks!

CrispKouki 11-12-2020 12:41 PM

Pretty sure the main harness runs inside the fender and when the car is lowered, the tire can rub through the wires.


Sent from my iPhone using Tapatalk

S14rebuild 11-12-2020 01:00 PM

Quote:

Originally Posted by CrispKouki (Post 6400048)
Pretty sure the main harness runs inside the fender and when the car is lowered, the tire can rub through the wires.


Sent from my iPhone using Tapatalk

Bingo!!!.....

MyNameIsOllie 11-12-2020 03:50 PM

Quote:

Originally Posted by S14rebuild (Post 6400054)
Bingo!!!.....

Thanks for that, I'll check it.

MyNameIsOllie 11-13-2020 10:28 AM

Fixed now, ended up rewiring the 12v connection.


All times are GMT -6. The time now is 03:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™