need help, car not starting
 

does anyone have a harness for an sr that I can use to see if the car would start up...I did a swap and the motor is cranking but doesnt start, I tried changing the starter chip, etc.. and the last thing that i can think of is the harness being messed up during the swap....any help would be good

thanks, Im located in annandale

just remember air,fuel and spark

there is spark, just a little weak, and def. there is fuel

Hm.. Double check all connections, Make sure your plugs are good, make sure the wires are good..

Pm me your address I may be able to swing by sometime today or tommorow.

i really want to get this car started....im willing to pay if anyone can get this car started

I'll come over tommorow. Im bed ridden sick today, Most def tommorow.

where are you exactly?

annandale, va

ouch thats a 2hr drive for me man sorry i would love to help though. all i can suggest without seeing it would be if its a modded sr harness with the ka terminals then check for any shitty solder jobs and the ENTIRE!!! starting circuit for any bad grounds or anything. i have a bud who recieved a bad maf and computer so check those out aswell.
lemme know how it turns out.good luck

thanks for the advice...im looking to try out the harness as soon as my finals are over

weak spark on all cyls? i had a similar problem, my ignition outputs from ecu were mixed up. probably not your case but check for any splices

Did you make sure your cam angle sensor is lined up?

yea i do line up the cam angle, and as far as the ecu wire splice, im running a power fc and i tried hooking it up to the power fc and the ecu....im probably going to take the car to BT motorsport for them to check it out