Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   Engine Tech (#/f/forumdisplay.php?f=96)
-   -   sr20det manifold/exhaust leak help (#/f/showthread.php?t=184590)

iAMprojekt 03-30-2008 09:13 AM

sr20det manifold/exhaust leak help
 
well ive got an exhaust leak and its coming from right below the manifold as illustrated in the pic below.... but when i put a jack up under the downpipe to see if that stopped the leak the car started idleing higher. i raised the jack 3 pumps and with each pump the idle increased.

help.... is this something like a vacuum leak? and how do i fix this etc....


thanks in advance

http://i271.photobucket.com/albums/j...t/sr20leak.jpg

MADE 03-30-2008 11:10 AM

Pull it apart and you will probably find the gasket is shot. When you get it apart might as well inspect for other gaskets and problems.

iAMprojekt 03-30-2008 11:52 AM

Quote:

Originally Posted by MADE (Post 1931501)
Pull it apart and you will probably find the gasket is shot. When you get it apart might as well inspect for other gaskets and problems.

yea, i thought about doing that... but working around that area is a pain....


would i start from the bottom (unbolting DP and working my way up.....)


or start from the top? (move I/C piping out the way, etc...)

MADE 03-30-2008 12:03 PM

Go to Zeroyon.com or anyother site that has a FSM you can download and it explains it all. Trust me that spot is not hard to work with compared to other cars. Plenty of room just ask Z owners:wiggle:



So easy a cave man can do it.

iAMprojekt 03-30-2008 10:51 PM

Quote:

Originally Posted by MADE (Post 1931581)
Go to Zeroyon.com or anyother site that has a FSM you can download and it explains it all. Trust me that spot is not hard to work with compared to other cars. Plenty of room just ask Z owners:wiggle:



So easy a cave man can do it.


haha thanks. im going to tackle it tomorrow. its leaking pretty badly...

IRN 03-31-2008 03:45 AM

i had that leak on me a few times. do it once right and get new locking tabs under the nuts from nissan. its not fun ripping it out 3 weeks later for the same exact problem. start with disconnecting o2, oil + coolant lines, hot pipe, intake filter tube, and the rest of the easy stuff. take off the downpipe from the elbow and then the manifold and pull the whole thing (mani,turbo,elbow,w/ lines still on turbo) and take off the 2 nuts on the brake master and slide it to the side for room.


All times are GMT -6. The time now is 04:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™