Info on hotpipe topmount Sr20det
 

Hey guys are there any company that sell hot pipes for Sr20det with top mount turbo mine is kinda rigged and doesn’t fit to well I have a peakboost manifold and greddy intercooler

I have a hot pipe that comes directly off the turbo down to where the frame. I can get a picture of it if you want.

It literally would be cheaper and increase your chances of fitment if you just take measurements and buy the necessary pipework and then take it somewhere to be tig welded.

This is your best option... You pay for labor, but you have a piece that fits like factory when it’s sll said a done.

I'm in the same boat with my full race top mount setup. The intercooler setup will be one of the last things I knock out in the engine bay. I have a Greddy ls intercooler and it looks like I will need a 22-inch pipe to complete the setup. Vibrant has what u need.

Can you send link for the vibrant part

My military computer is blocking vibrant website but I was able to find it on Amazon.

https://www.amazon.com/d/Turbocharge...ing/B000E43BM6

^^ and you would still have to measure and take it to get tig welded (as I mentioned before lol). Also, if you need it to go from the turbo to the frame (turbo 90 or 45 or whatever angle down), one would need atleast another 45 or 90 degree pipe with 6 or so " legs.

OP, you could have had the proper pipework welded up by now if you just went a fabricator instead of waiting on Zilvia to provide you the answer. That or go search Google for top mount intercooler setup and take that to a fabricator and tell him to replicate.

Good luck!