180sx Kouki Tails question.
 

just got mine in today. left and right tails with center assembly for 247 shipped, however there are no sockets and such included. I did some research but only found a few unsolved solutions. any insights?

you gotta get the Kouki sockets

http://www.rhdjapan.com/jdm-low/Niss...Assembly-29158#

Part Numbers are

Socket Assy-RR 26556-60F00
Socket Assy-RR 26551-60F00

You'll need Two of Each one is for the outer light, the other is for the inner light, cannot remeber which is which.

As for the Reverse Light I THINK you can use the 240's Sockets?? I cant remember what I used, I had a bag of MISC light sockets mine might have been in there.

#/f/tech-talk/276805...l-wire-up.html

Thank you. Saw your post in the year old thread which cleared some things up. So I would need to order 2 of the sockets in the link you posted from RHD? If not then which socket assembly is in the link you posted, 26556 or 26551? if thats the case I would need to source one or the other sockets.

Sorry for all the questions. Appreciate the help though.

seems the RHD link is for the center garnish, look around there for the inner and out socket or just give Patrick a call over there and im sure he can order the correct ones for ya.

gahh. sorry to bother you again but doesnt seem like RHDjapan has any other socket assemblies besides the one you posted. the seller called me today saying he modified the stock ones and retrofitted them in using a different size bulb as well. seems like thats my only choice now, however i've heard of rsx and maxima sockets as well.

USDM 240sx stock ones cant be moded unless you tape them in there

Ive heard of similar sockets but im sure they will have to be modded

thanks for your time and all your help again. i will try and contact someone from nissan.cc who is local.