![]() |
redtop sr20 help! please read!
ok im having a problem with my redtop sr20, its in a s13. it runs good at idle and free rev, so i took it out for the first time in a while. it was at the shop, they were testing some **** thats wrong with it. its never really ran right, so i got an enthalpy ecu and now this is where im at.
i let it warm up. then i took it out to see how it handles boost under a load. the first few minutes it ran pretty good. put some fresh 94 octane in it. then i got on it pretty hard, to test it. the higher rpm range it brakes up and basically keeps breaking up. kinda think of like a fully automatic gun. it seems like if i slowly get into the boost it takes it better, and slowly raise the rpms. the only things that i can really think of is that the gas that was in there was kinda ****ty(still sunoco 94, just a little old as i was gone on military leave for about 8 months), the coilpacks dont have the screws in them(into the valve cover), or a ground issue(which i think should make it run kinda rough at idle) any suggestions or opinions would be greatly appreciated. sorry for the structure of this all, it kinda turned into a bit of a rant mods: hks 2510 turbo z32maf z32 ignitor 550inj greddy dp, 3" all the way back fmic. enthalpy ecu, supposed to be tunes for 16-18 lbs. as close to 300 hp as i can get on a relativley safe tune. |
bolt down your coil packs first ,possibly a bad maf
|
my old car did the same thing when i had a bad (corroded) chassis ground.
|
thanks guys im gonna try those out.
anyone else have any ideas? |
talked to enthalpy today and he said he tuned it for 91 for some reason. i run 94. would that make a huge difference?
|
nopes, that just means you have a bit of leeway from detonating. What spark plugs are you running and what are they gapped at?
Try running some BCPR7ES-11 and gap them down to .030, if its still breaking up, gap it down to .025. |
Hows your timing? 15 degrees BTDC?
|
Quote:
|
| All times are GMT -6. The time now is 05:15 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™