18x10 +11 square
 

Will I have any trouble fitting 18x10 et11s on the front of my s13 hatch? I know I can get them to fit fine in the rear but it seems the front might poke a little more.. I just have stock metal fenders but the fenders are pretty beat and I have a fender roller and am not afraid to pound them out with a hammer. Ill probably run a 235/35 falken or something close


This is only until I get overfenders. What size over fenders would work with this set up + how big of spacers in the rear?

TIA I am very new to this car but not to fitment.

then measure it. you can figure it out mathematically....or you can click the "search" and see where you post ends up....but this is zilvia...you have 6 posts..and I'm 100% sure you didn't search...cause we have threads for this.

word.. I have been searching and everyone runs crazy offsets in the rear and milder setups up front.. I dont see too many square set ups. I cant measure because I still have a 4 lug and these are 5 and I also havent bought the wheels yet.

but you are correct sir. i can do the math, i was just being a lazy ass nub

Its doable but its not just the fenders you'd have to worry about. You will be rubbing all over the wheel well. Time to relocate the harness and beat the shit out of the wheel well to get some full lock clearance.

Or you can tub it, looks super gangster and no rubb-age!

9.5 +15 sticks out about 15mm so ad 12.6 and them add 5mm on that so maybe stick out about 30ish

235/35 on a 18x11? dont you think thats a little narrow for such a wide rim?

yes that is pretty narrow for such a wide rim. id say 245/40/18

He said 18x10+11

265/35/18 or 285/30/18 be a man.

Sorry 18x10 you should still have 275 or larger on the it. If you do the math a 10 inch wide rim is actually closer to 11 inches lip to lip because 10 inches is the inside of the rim. so 25.4 millimeters equals 1 inch so 11x25.4=279.4