4 prong lug key anyone??
 

Alright guys I'm doing a r33 brake conversion swap on my s14 and noticed I had wheel spacers with the 4 prong lugs so my question is does anyone around have this key that I can borrow so I can finish my brake conversion lol this would help a lot. If your willing to help please text me asap (909)644-2534 or even just let me borrow ill buy you food :)
I'm located in rialto Ca
Attachment 68612

Sent from my HTC6500LVW using Tapatalk

Wrong section, go to regionals.

needle nose pliers and cresent wrench.

I couldn't tell





Explain please lol

Sent from my HTC6500LVW using Tapatalk

insert needle nose pliers into the two boles, apply forward pressure towards the lugnut, turn the pliers with cresent wrenth(unless you are a heman, you can turn it with your own sheer force of your arms applied to the pliers)

Well you need to pay attention to stuff like that in the future.

I've got those damn things on my car to and only thing I thought of doing is buying a cheap socket and grinding it down until there is 4 pins that will fit in those holes. I couldn't find any body that would sell the key for those you have to buy a whole new spacer kit that comes with the key

Sent from my SPH-L720 using Tapatalk

I know someone on here that lives near by has them but it's just a willing matter to share lol it's not like I'ma steal. They are going to be there watching me take the spacer off and that's all I need it for

Sent from my HTC6500LVW using Tapatalk

what a shitty design.

What's a shitty design?

Sent from my HTC6500LVW using Tapatalk

What's a shitty design?

Sent from my HTC6500LVW using Tapatalk

those lugs, that shits stupid as fuck.

I know man I bought the car this way and the guy had said the socket was in the car (2years later I'm doing a brake conversion swap) and the socket is no where in the car lol

Sent from my HTC6500LVW using Tapatalk

Try googling, you may just have to buy the key. That is a pretty dumb design.

http://www.shop.upgrademotoring.com/...LKICWTSKEY.htm

Doesn't hurt to look, (if you haven't gotten nosey already) but dig around in the quarter panels from within the trunk. Might be down yonder.

You would not believe some of the things that I've found in the past 7 years.

Be very careful of the unknown, you don't want to stab your finger(s) w/anything.

How can you let an object like this beat you? Get a punch, screwdriver, chisel, air hammer, etc. spend time lightly pecking at the holes in lefty loosey direction. you only need to loosen the lug, then needle nose pliers. And never install them again!