Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - My S14 Drift Car Build

- Builds (and builds only) (#/f/forumdisplay.php?f=131)

- - My S14 Drift Car Build - LS1 content inside (#/f/showthread.php?t=288367)

My S14 Drift Car Build - LS1 content inside

Ok, so I finally feel comfortable starting on of these threads. I hate it when people make them and don't update them for months.

I'm going to start this off with a little nostalgia - a short history as to what the car has been through already.

When I got the car it was exactly what I needed it to be - stock, reliable, and it happened to be automatic. These are the pictures I took when I first saw it:

http://farm3.static.flickr.com/2725/...5ac8af6bcb.jpg

http://farm3.static.flickr.com/2603/...16573a9ce5.jpg

http://farm3.static.flickr.com/2552/...03ee03451c.jpg

Within a week or so it looked like this:

http://farm4.static.flickr.com/3479/...f381ed928e.jpg

Then a few months after that I painted the bumpers and picked up some lowering springs/shocks:

http://farm3.static.flickr.com/2623/...bb332c1148.jpg

I drove around like that for quite some time, I ended up painting those wheels satin black, then traded them for my old 300ZX TT wheels that were satin black. I believe it was about 7-8 months after the above picture that I went to Japan for the first time and bought coilovers, an exhaust, some wheels and other odds and ends (the car was still automatic KA at this point):

http://farm3.static.flickr.com/2631/...e7cababa3c.jpg

Then I sold those wheels after ~6-7 months, did a 5-speed swap with the transmission out of my old S14 (come to think of it I've had something off of my old S14 on this car every step of the way :) ), and bought the Regamasters:

http://farm3.static.flickr.com/2501/...3c8b59c1ee.jpg

Then I did the SR swap, I'm not sure how long it was after that...I know I did it at the end of May 08:

http://farm3.static.flickr.com/2510/...44b7b7f633.jpg

I've done little stuff to it since the swap, finally painted my rear valances and c-west mini spoiler, some s15 injectors, a tubular manifold, a custom intercooler set up (which used the HKS bypass valve off my old S14), a OS Giken 1.5way, got some Fortune Auto coilovers to replace my JICs....oh, and lets not forget building the RSs, haha.

This is how it looked up until a few days ago:

http://farm3.static.flickr.com/2684/...806f426d3e.jpg

....

Now for the build portion!

I picked up a LS1 short block a month or so ago and it came with a bunch of extra goodies. I drove it back from Richmond in the trunk of the S14!

http://farm3.static.flickr.com/2688/...cdbda1e012.jpg

http://farm4.static.flickr.com/3502/...e30ff594fd.jpg

I picked up some 5.3 truck heads, an intake with fuel rails and injectors, some LS3 valves, dual springs w/ retainers, and trick flow hardened push rods since those pictures. I am still hunting for a transmission, wiring harness/ecu, throttle body, and a few other bits.

This was the car's state Tuesday:

http://farm3.static.flickr.com/2438/...df3ddde161.jpg

This was the status Wednesday night:

http://farm4.static.flickr.com/3514/...fb19a06b6e.jpg

http://farm3.static.flickr.com/2757/...ac5f1f2014.jpg

http://farm3.static.flickr.com/2651/...720fc64cd5.jpg

This weekend it is getting towed up to Gloucester where my friend at RE-Spec Garage is going to help me accomplish the next step - cage it, tub it, and a few other things I'll keep as a surprise so you have a reason to keep checking back, haha!

Just an idea for my fellow Zilvians out there (because I am going to be struggling). Anyone who donates $10 via paypal will get their name on my car somewhere. My paypal address: Frog800000 (at) AOL dot COM. Obviously with it written like a normal email address. Depending on how many people do it will depend on where I put the names - I am thinking the front windshield would be pretty funny.

I will be posting updates in my blog as well - knoop.sumospeed.com. I'll probably post more pictures in there then in the thread because I can host them directly on the blog rather then host them on flickr, then copy and past them here and do the [img] tags.

yes you will be struggling. it took me about 7000 to do everything including my own mounts etc.

i hope you got some cash set aside because unless you understand how to fab you going to spend a lot on mounts, driveshaft, wiring, headers etc. its not as simple as it seems and it adds up very quick even if you did everything yourself. good luck, lsx is very fun.

I love where this is going v8's rule!!!!!!!

this build is gona be epic looking foward for updates!!

I'm following this build (everyone seems to be going V8 these days)...

So far so good man,I'll keep tuned to see what the next set of photos bring.

Love the looks, good luck with the build!

This build is awesome, and inspiring as i started and am trying to progress with the same base you did.

Keep up the good work, pm me if you have questions.

Nice choice of engine sir!

Can't wait to see this done stephen. Good luck! Let me know if you need anything!
- Billy

I'll probably see your car at RE-Spec when I take it to have the rest of my undercar work and alignment done.

i'll be keeping up with this build. im planning on doing a v8 swap someday soon hopefully since i just blew my KA. ive calculated how much it would cost me and so far i'd say 4000 for a motor/tranny/ecu/etc. and then 3000 for the Sikky mount kit, so 7000 altogether.

one of my favorite cars on the site! good shit man

Thanks for the good words guys. We got a lot done today. This shit is going to be crazy, I don't think it has fully sunk in for me yet, haha!

I'll get some pictures up tomorrow...or MAYBE even tonight.

Sweet, here's hoping for those pics tonight!

Actually the pictures wont work tonight I forgot my camera cable at home, so you'll have to wait until tomorrow!

plan on keeping A/C and power steering?

Quote:

Originally Posted by thatdrifterguy (Post 3122328)

right.... this is just what i was talking about. its not a bolt in. there are a lot of odds and ends. do some research on what all you need at very minimum, its going to be more than that. wanna do it right? then it will be more like 9-10.:bash::bash:

ive done the math all in all i looked to spend 12k on just droping it in the way i want it :D

Ok...so it took me a little longer then expected to get to these. I was up in Gloucester Saturday through today and we got a lot accomplished. It should be interesting to see how quickly this all goes.

Saturday:

On the way up:
http://farm3.static.flickr.com/2784/...45c49ee1ae.jpg

Those straps on the front of the car are pieces of shit and we had to stop on the way and replace them with a much better strap, haha.

When I got there I finished ripping out the rest of the interior - at this point everyhting was out but the dash/door panels and carpet.

http://farm3.static.flickr.com/2795/...f9920368fd.jpg

http://farm3.static.flickr.com/2613/...bb6750412e.jpg

Danny took these shots while Raz and I were dealing with the dash -

http://farm3.static.flickr.com/2766/...412e147100.jpg

http://farm3.static.flickr.com/2783/...82eec759ac.jpg

The pile of shit from the interior:
http://farm3.static.flickr.com/2786/...92ff016fac.jpg

This is what it looks like without the dash:

http://farm3.static.flickr.com/2563/...cf101b9798.jpg

They shove so much shit in there it isn't funny. I meant to take a picture after I ripped all of the stuff out but it'll have to wait until next weekend now.

Danny doing work:
http://farm3.static.flickr.com/2800/...35bfd2c630.jpg

Hmm...there's a lot less stuff in here then there was
http://farm3.static.flickr.com/2466/...bdc2348d_o.jpg

This is what the strut towers look like once the glue shit is removed from all of the seams:
http://farm3.static.flickr.com/2561/...9e8fe267ed.jpg

This is what they look like stitch welded:
http://farm3.static.flickr.com/2735/...3dfe3ae922.jpg

After the dash was out I noticed all of the shit attached to it would interfere with my wire tuck plans...
http://farm3.static.flickr.com/2448/...f598e17b5d.jpg

I removed it all and it left a whole lot more room available.
http://farm3.static.flickr.com/2769/...16d5983d0c.jpg

This little removable cover will make a perfectly accessible fuse box
http://farm3.static.flickr.com/2520/...c3bd31dc2b.jpg

Sunday:

I woke up and drove 30 mins to get some dry ice (no place sells it in Gloucester so I had to go into Hampton). We started on the sound deadening material and got most of it removed....all thats left are some patches on the rear seat back area.

http://farm3.static.flickr.com/2780/...e6d80e80fb.jpg

While Eric and I works on that (and 'dry ice bombs') Danny and Raz were working on bending the bars for the cage.

The main hoop came out super fucking tight, just like we wanted it (we're using 1.5" 0.125 tubing). A few spots on the inside of the car were hammered in to fit it, but it fits like a glove! Obviously, it is just sitting there in these pictures so it will not look 100% right in some of the pictures.

http://farm3.static.flickr.com/2580/...a8e051609a.jpg

http://farm3.static.flickr.com/2499/...6dae8ebc54.jpg

The front hoops fit as tight as possible as well:
http://farm3.static.flickr.com/2740/...98f998939a.jpg

I have to bring my seat up there before we can do the door bars. I am trying to figure out what to do in order to keep my door panels. The panels are thick as fuck, and I am willing to cut them, but I would prefer for the cutting to occur under the elbow rest area...I'm not too sure if that will be possible.

http://farm3.static.flickr.com/2767/...ec39201ccd.jpg

That's all from this weekend. It is difficult to take pictures and work on the car at the same time, haha.

In my blog you can see the full sized versions (900X600) of the images in this post.

wow dude, u got some good shit going on here. props 4 man

sweet build mate!!
deom the looks of the front bars your going through dash instead of around it ?

Yes, they are through dash bars. But where the are only requires a small amount of the dash to be cut, and it really will not be noticeable. It is almost directly where the defogging vents are, so you just cut the 1" of material behind those so the dash can still be removed if need be.

nice cage fitment... I know it takes a little time to get it right but when you aren't hitting your head on it all the time you will be glad you did it hah

Good to see a fellow Virginian working on an S14. I don't see many well modded 240's period anymore...much less to this extreme. GL with the build and keep on posting! :)