300zx custom boost controller mount
 

Was bored and looked for a new little project to do and I was tired of seeing my greddy profec boost controller so lamely sitting on my steering Collum housing. So I decided to see where people mount them. Most people mount on the stereo and delete the clock and place in there. I thought it was a cool idea but then I wanted something a little more original. So I only seen some one else do this so I decided to take on the challenge! With a little bit of fiberglass and filler I made a mount on the speedo housing. The guy I saw the idea from just cut a rectangle and filled remaining space with ABS plastic. I wanted a near stock lock so I made mine of fiberglass and touched it up with filler to give it a good finish. Loved the way it came out! Just need to mount and rewire!
Just thought I'd share a little project!
Attachment 84346
First cut the rectangle.
Attachment 84347
Made some measurements and fiberglassed the housing to get a direct fitment. Little bit of filler to fill in scratches and imperfections.
Attachment 84348
Freshly painted flat black(still wet in picture)

Finished product!
Attachment 84349
Attachment 84350Attachment 84351

This is cool

Thanks!!(: