German zenki headlights
 

i am trying to find a wiring diagram for the low beam electronic leveling control. if anyone can give me a link to that or knows where i can find the control. or even how to wire up a rig for it please let me know.

anybody know anything on this?

anybody?..................

UK FSM, can be found on sxoc.com I think. I wired mine up two years go so I don't remember.

couldn't find it. someone please send me link.

interesting, if you find the wiring diagram please post it up. i'd like to check this out as well.

IIRC, the switch has the typical illumination input to light up at night, red/blue. There's also power and ground in, then trigger out, four wires which match to the motors. The motors also have power and ground. Black being ground of course, orange/green for power.

the motor has a 6pin connector i just need to know which wires are up/down. also, is the hight a variabl adjustmente or just high and low angles

The wires which aren't power and ground are the adjustments, there's only four left over once the motor is powered, they match the same colors as the switch. They're all blue with stripes, like blue/white, blue/black, etc. but I don't recall the 'order' of them. If you have the plugs and switch, which you should otherwise you can't do anything, you're not far off with that information.

i was going to wire up my own switch thats why i need a diagram. unless you know where i can get the factory switch

Anywhere in the UK. Just ask. The Euro guys are usually really cool with shipping small shit. I got all the parts needed as well as a pair of heated mirrors and five Apillar grab handles with brackets for $50.

do you have a contact?

Nissan SX Owners Club, I'm sure I posted that before. Go on, register, and make friends.