SR20 + S13 parts- Turbo, Nistune, Greddy, Suspension, LS Coils
 

• Cleaning out a bunch of old parts, prices are mostly firm unless you are buying multiple items. Will consider reasonable offers.
• Shipping is not included, will be shipping from 38104. Most stuff would be $10 to $40 to ship but I can get exact quote if needed.
• I have pictures of most items, can get more pictures if needed.

Best way to contact is via PM

Pictures included below, alot more pictures on my googledrive: https://drive.google.com/open?id=13W...arpbzx-2HIQ1Gt

1. ISR Rear arms set, bearings have some play, ~20k miles of use: $150 --> $120 [SOLD]
2. S14 SR20 WC ECU: $150[SOLD]
3. Walbaro 255 fuel pump (~6 years old, worked fine when removed) one of the retaining clips is broken (see pictures): $15
4. S14 Sr20 turbo with stock turbo manifold, Greddy divided outlet, DIF lines and fittings. Has some shaft play, on the higher end of spec (price reflects this): $350 -->$320 [SOLD]
5. New T28 turbo inlet gasket: $10 [SOLD]
6. DIF Oil and coolant lines (feed and return) for T28 turbo with all fittings etc.: $80 --> $70 [SOLD]
7. Greddy divided turbo outlet: $80 --> $70 [SOLD]
8. S13 stock rear arms with Energy suspension bushings and zerks fittings to allow proper greasing: $40
9. S14 SR20 ?WC? ECU with Nistune Type 3 board installed, includes individual Nistune License and Nistune cable. (698 from Nistune): $450 -->$400
10. Greddy induction kit for T28 bottom mount turbo with custom Aluminum air box (designed for S13), all wrapped in DEI Gold tape: $250 -->$220 ($180 without the airbox)
11. OEM Z32 MAF, Wrapped in DEI Gold tape: $120 --> $100
12. S14 SR20 intercooler kit with all piping and Greddy Type RS BOV, ebay intercooler: $200 [SOLD]
13. BOV Recirculation setup for T28 turbo with Turbo Smart Kompact dual port BOV (Everything from turbo inlet to BOV included): $280 --> BOV sold, piping still available -->$120
14. Ebay S14/S15 SR20 Intake manifold (typical cheap ebay quality, never installed, just test fitted): $40 --> $35
15. Aeromotive FPR with gauge: $120 --> $100
16. Unknown brand SR20 T28 oil and coolant lines: $40 --> $30
17. Ignition coils from S14 sr20 with harness: $120
18. 4x LS2 Ignition coils (I have 2 sets). $70, $120 for all 8. -->$60 for 4, $110 for 8
19. Wiring specialties LS2 Coil conversion harness (New, never used): $100-->$90
20. SR20 OEM Ignitor Chip: $40
21. GREDDY PROFEC B SPEC 2 with solenoid (silver): $150 --> $130 [SOLD]
22. Greddy full auto turbo timer with plug and play harness for S13: $100 [SOLD]
23. Subaru STI 550 CC side feed injectors with modified SR20 harness to make this plug and play!: $130 --> $120
24. ~4 year old Wiring Specialties S14 SR20 into 91 S13 Manual chassis conversion harness. Includes main and lower/transmission harness. Missing Alternator plug, and I modified the harness in a couple places. Sill plug and plan for S14 sr20 into S13. Can provide more details if interested: $250. --> $230
25. Stock front brake pads for 2004 Honda S2000-one has brake grease on it: $50 [SOLD]
26. Qstarz BT-818xt GPS receiver, 10Hz refresh rate: $50 -->$40
27. No name turbo outlet pipe-dent on side and 1 damage and 1 missing stud: $20 [SOLD]
28. Used ignition coils from 2001 VQ35 Nissan Pathfinder. $30 for all 6.

http://imageshack.com/a/img922/9974/7qto2B.jpg
http://imageshack.com/a/img923/4692/8hJ7j6.jpg
http://imageshack.com/a/img923/2017/2sxXa8.jpg
http://imageshack.com/a/img924/8792/v0n9ny.jpg
http://imageshack.com/a/img923/7097/tptr6J.jpg
http://imageshack.com/a/img924/1897/AX31iw.jpg
http://imageshack.com/a/img922/2346/MJvQCn.jpg
http://imageshack.com/a/img921/751/crfmmx.jpg
https://imagizer.imageshack.com/img923/9965/agqdSp.jpg
https://imagizer.imageshack.com/v2/1...922/JKFqbm.jpg


LS Coils and WS harness
https://imagizer.imageshack.com/img922/6673/Mhu4ji.jpg

ill take the valve cover- send me a price for shipping to 98264
thanks

^^if he doesnt buy valve cover I'll take it.

Still have the Greddy divided outlet?

Valve cover is pending, will update if that falls through. I still have the turbo outlet, pending on that as well. Also have someone interested in the full turbo, ECU, turbo outlet setup so want to see if that goes through before separating that.

I'll text you about the arms!

valve cover pmt sent-- post a pic of the z3 motor mounts..

Z3 motor mounts are spoken for.

Valve cover and Z3 mounts sold and shipped.
Added a few new items.
I have had some interested in the intake and exhaust stuff but I would rather sell that as a package so only consider package sale unless I have some interested in most of the individual parts. It is a REALLY good setup for maximizing what you can do with a stock turbo/stock motor or switch the turbo out for a Garrett t28 and easily make 350whp (or more!).

Bump! updated with sold items removed. Home for the next few weeks so should be able to ship stuff within 1-2 days!

Bump, updated with slightly lower prices and sold items remove.