Hey guys, sorry its been a minute. Life got in the way of the Z haha. Got hitched, bought a place, night school to get degree, new job and had a kid.

New place has a 600 sq ft shop with same size basement under it. Got some other tools and storage things, as well as a (free) mill table to turn into a weld table someday.

https://lh3.googleusercontent.com/Ds...=w2041-h594-no

https://lh3.googleusercontent.com/Od...w=w768-h930-no

New daily.

https://lh3.googleusercontent.com/YG...A=w720-h538-no

Not much has changed on it to be honest, but getting the itch to get back into it.

https://lh3.googleusercontent.com/cZ...=w1263-h947-no

Some guys asked why the cage roof bar was angled slightly down back to the main hoop. This gap should explain that, I hope.

https://lh3.googleusercontent.com/Zv...A=w711-h947-no

Dash bar through the steering column mount. Stock heater core fits.

https://lh3.googleusercontent.com/Nw...=w1263-h947-no

S14 subframe, S13 HICAS rack, S14 JDM sway bar & mounts, SPL tension rods, S14 knuckles, S14 coilovers.

https://lh3.googleusercontent.com/Wo...=w1263-h947-no

https://lh3.googleusercontent.com/61...=w1263-h947-no

https://lh3.googleusercontent.com/iZ...=w1263-h947-no

Rear subframe and mount waiting for the new solid bushings.

https://lh3.googleusercontent.com/tv...w=w711-h947-no

https://lh3.googleusercontent.com/PR...=w1263-h947-no

Z32 NA finned diff cover w/ SPL solid diff bushings.

https://lh3.googleusercontent.com/0m...A=w711-h947-no

StopTech Z33 Track Pack 324mm rotors and pads for the CTS-V Brembos.

https://lh3.googleusercontent.com/31...w=w711-h947-no

Kirkey 47500 Seat - cover will stay in the bag until the car is ready since its the same price as the seat haha but sample S2K pic with cover shown.

https://lh3.googleusercontent.com/3j...g=w711-h947-no
https://lh3.googleusercontent.com/-u...g=w600-h389-no

good shit, keep up the progress

This thread makes me realise how lazy I am. F*ck man this is going to be awesome.

Turned up 6061 subframe bushings to fit the new mounts perfectly.

https://lh3.googleusercontent.com/GZ...8=w706-h939-no
https://lh3.googleusercontent.com/yQ...o=w750-h491-no

Almost have the furnace hooked up - I ran gas out to shop, just need some ducts and to close it all in. Actually want to work on the Z this winter.

https://lh3.googleusercontent.com/tS...1=w722-h939-no