![]() |
How to: Wire G20 radio to S13
I just bought my first 240sx. I have a 89' 240sx coupe. The previous owner cut the factory connecter. So I had a stock 99-02 infiniti G20 headunit laying around. So I went to the junkyard and cut off the pig tails for the g20 radio and I wired it up to the wires on the s13.
Wire diagram ___________________S13 wires=======G20 wires____________________________ Constant 12V+~~~~~~Red/Black========Red/Green Switched 12V+~~~~~~Blue=============Green/White Ground chassis~~~~~=================Grey/Blue Illumination~~~~~~~~Red/Blue=========Blue Dimmer~~~~~~~~~~~Red/Yellow========Red/Yellow Antenna trigger~~~~Black/Red========Red Amp trigger~~~~~~~Lt Green/Red=====Lt Green/Red Front speakers: Left front (+)~~~~~~Blue/White========Pink Left front (-)~~~~~~Blue/Yellow========Blue Right front (+)~~~~~Brown============Violet Right front (-)~~~~~Brown/White=======Light Green Rear speaker: Left rear (+)~~~~~~~Red============Yellow Left rear (-)~~~~~~~Green===========Brown Right rear (+)~~~~~~Blue============Red Right rear (-)~~~~~~Pink============Green Back of headunit http://imagizer.imageshack.us/v2/280...661/ca7iTf.jpg Headunit installed http://imagizer.imageshack.us/v2/280...907/NDYKCV.jpg 99-02 Infiniti G20.Adapter connectors i will be using when i install aftermarket radio http://imagizer.imageshack.us/v2/280...536/ghCh2d.jpg |
Looks sweet. My only question is that the P11 radio was a Bose unit, meaning it was meant to connect to an amp. Does it have enough power to drive non-amplified speakers?
|
^ this. Curious how it works.
|
Quote:
|
| All times are GMT -6. The time now is 07:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™